Abstract
The automotive design process and the materials in the automotive industry in recent years has caused great interest to the industrial and academic sector. In this study was to evaluate the effect of the amount of bentonite on the thermal and rheological properties of the compound bentonite / paraffin wax. Two bentonite ratios were used: paraffin wax (40:60 and 30:70). The paraffin was characterized by Fourier transform infrared spectroscopy (FTIR), the bentonite was characterized by means of x-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray fluorescence (XRF). The bentonite/paraffine wax composite was characterized by differential-scanning calorimetry (DSC) and rheology. The sample that contains a higher amount of bentonite shows a lower latent heat, and this could cause a greater heat transfer. Finally, the sample that has a lower amount of bentonite evidenced a lower viscosity, and it could be related to a lower interaction between the particles. The sample S1 due to its lower latent heat compared to S2 could represent an interesting alternative to develop prototypingclays. since these materials are characterized by their low working temperatures and easy malleability. Keywords: automotive, prototyping, latent heat, bentonite, paraffin. References [1]X. Ferràs-Hernández, E. Tarrats-Pons, and N. Arimany-Serrat, “Disruption in the automotive industry: A Cambrian moment,” Bus. Horiz., vol. 60, no. 6, pp.855–863, 2017, doi: 10.1016/j.bushor.2017.07.011. [2]O. Heneric, G. Licht, S. Lutz, and W. Urban, “The Europerean Automotive Industry in a Global Context,” Eur. Automot. Ind. Move, pp. 5–44, 2005, doi: 10.1007/3-7908-1644-2_2. [3]S. I.-N. Delhi, “Automotive Revolution & Perspective Towards 2030,” Auto Tech Rev., vol. 5, no. 4, pp. 20–25, Apr. 2016, doi: 10.1365/s40112-016-1117-8.[4]M. Tovey, J. Owen, and P. Street, “in Automotive Design,” vol. 21, pp. 569–588, 2000. [5]Yasusato Yamada, Clay modeling : techniques for giving three-dimensional form to idea. 1997. [6]H. Murray, “Industrial clays case study,” Mining, Miner. Sustain. Dev., vol. 1, no. 64, pp. 1–9, 2002, [Online]. Available: http://www.whitemudresources.com/public/Hayn Murray Clays Case Study.pdf%0Ahttp://whitemudresources.com/public/Hayn Murray ClaysCase Study.pdf. [7]Transparency Market Research, “Industrial Clay Market - Global Industry Analysis, Size, Share, Growth, Trends, and Forecast 2016 - 2024,” New york, 2016.[8]J. Murphy, Additives for Plastics Handbook. Elsevier, 2001. [9]Y. Hong, J. J. Cooper-White, M. E. Mackay, C. J. Hawker, E. Malmström, and N. Rehnberg, “A novel processing aid for polymer extrusion: Rheology and processing of polyethylene and hyperbranched polymer blends,” J. Rheol. (N. Y. N. Y)., vol. 43, no. 3, pp. 781–793, 1999, doi: 10.1122/1.550999. [10]D. P. Rawski, P. Edwards, and U. States, “Pulp and Paper : Non fi brous Components,” no. January, pp.1–4, 2017, doi: 10.1016/B978-0-12-803581-8.10289-9. [11]J. Speight, “Instability and incompatibility of tight oil and shale oil,” Shale Oil Gas Prod. Process., pp. 915–942, 2020, doi: 10.1016/b978-0-12-813315-6.00017-8. [12]T. P. Brown, L. Rushton, M. A. Mugglestone, and D. F. Meechan, “Health effects of a sulphur dioxide air pollution episode,” vol. 25, no. 4, pp. 369–371, 2003,doi: 10.1093/pubmed/fdg083. [13]R. Chihi, I. Blidi, M. Trabelsi-Ayadi, and F. Ayari, “Elaboration and characterization of a low-cost porous ceramic support from natural Tunisian bentonite clay,” Comptes Rendus Chim., vol. 22, no. 2–3, pp. 188–197, 2019, doi: 10.1016/j.crci.2018.12.002. [14]Z. Yi, W. Xiaopeng, and L. I. Dongxu, “Prepartion of organophilic bentonite / paraffin composite phase change energy storage material with melting intercalation method,” pp. 126–131, 2011, doi: 10.4028/www.scientific.net/AMR.284-286.126. [15]I. Krupa and A. S. Luyt, “Thermal and mechanical properties of extruded LLDPE / wax blends,” vol. 73, pp. 157–161, 2001. [16]A. Saleem, L. Frormann, J. Koltermann, and C. Reichelt, “Fabrication and Processing of Polypropylene - Paraffin Compounds with Enhanced Thermal andProcessing Properties : Impact Penetration and Thermal Characterization,” vol. 40164, pp. 1–9, 2014, doi:10.1002/app.40164. [17]M. Mu, P. A. M. Basheer, W. Sha, Y. Bai, and T. Mcnally, “Shape stabilised phase change materials based on a high melt viscosity HDPE and paraffin waxes,”Appl. Energy, vol. 162, pp. 68–82, 2016, doi: 10.1016/j.apenergy.2015.10.030. [18]M. Tovey, “Intuitive and objective processes in automotive design,” Des. Stud., vol. 13, no. 1, pp. 23–41, 1992, doi: 10.1016/0142-694X(92)80003-H. [19]J. Verlinden, A. Kooijman, E. Edelenbos, and C. Go, “Investigation on the use of illuminated clay in automotive styling,” 6th Int. Conf. Comput. Ind. Des.Concept. Des. (CAID&CD), Delft, NETHERLANDS, pp. 514–519, 2005. [20]N. W. Muhamad Bustaman and M. S. Abu Mansor, “A Study on CAD/CAM Application in CNC Milling Using Industrial Clay,” Appl. Mech. Mater., vol. 761, pp. 32–36, 2015, doi: 10.4028/www.scientific.net/AMM.761.32. [21]K. Shimokawa, Japan and the global automotive industry. 2010. [22]A. Bucio, R. Moreno tovar, L. Bucio, J. Espinosadávila, and F. Anguebes franceschi, “Characterization of beeswax, candelilla wax and paraffin wax for coatingcheeses,” Coatings, vol. 11, no. 3, pp. 1–18, 2021, doi: 10.3390/coatings11030261. [23]F. Valentini, A. Dorigato, A. Pegoretti, M. Tomasi, G. D. Sorarù, and M. Biesuz, “Si3N4 nanofelts/paraffin composites as novel thermal energy storage architecture,” J. Mater. Sci., vol. 56, no. 2, pp. 1537–1550, 2021, doi: 10.1007/s10853-020-05247-5....