Docosane-Organosilica Microcapsules for Structural Composites with Thermal Energy Storage/Release Capability
Open Access
Abstract
Organic phase change materials (PCMs) represent an effective solution to manage intermittent energy sources as the solar thermal energy. This work aims at encapsulating docosane in organosilica shells and at dispersing the produced capsules in epoxy/carbon laminates to manufacture multifunctional structural composites for thermal energy storage (TES). Microcapsules of different sizes were prepared by hydrolysis-condensation of methyltriethoxysilane (MTES) in an oil-in-water emulsion. X-ray diffraction (XRD) highlighted the difference in the crystalline structure of pristine and microencapsulated docosane, and 13C solid-state nuclear magnetic resonance (NMR) evidenced the influence of microcapsules size on the shifts of the representative docosane signals, as a consequence of confinement effects, i.e., reduced chain mobility and interaction with the inner shell walls. A phase change enthalpy up to 143 J/g was determined via differential scanning calorimetry (DSC) on microcapsules, and tests at low scanning speed emphasized the differences in the crystallization behavior and allowed the calculation of the phase change activation energy of docosane, which increased upon encapsulation. Then, the possibility of embedding the microcapsules in an epoxy resin and in an epoxy/carbon laminate to produce a structural TES composite was investigated. The presence of microcapsules agglomerates and the poor capsule-epoxy adhesion, both evidenced by scanning electron microscopy (SEM), led to a decrease in the mechanical properties, as confirmed by three-point bending tests. Dynamic mechanical analysis (DMA) highlighted that the storage modulus decreased by 15% after docosane melting and that the glass transition temperature of the epoxy resin was not influenced by the PCM. The heat storage/release properties of the obtained laminates were proved through DSC and thermal camera imaging tests.Keywords
This publication has 59 references indexed in Scilit:
- Fabrication and Properties of Microencapsulated Paraffin@SiO2 Phase Change Composite for Thermal Energy StorageACS Sustainable Chemistry & Engineering, 2013
- Synthesis of a paraffin phase change material microencapsulated in a siloxane polymerColloid and Polymer Science, 2012
- Form-stable phase change materials for thermal energy storageRenewable and Sustainable Energy Reviews, 2012
- 1H and 13C solution- and solid-state NMR investigation into wax products from the Fischer–Tropsch processSolid State Nuclear Magnetic Resonance, 2011
- A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)Renewable and Sustainable Energy Reviews, 2010
- Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storageSolar Energy Materials and Solar Cells, 2009
- Preparation of silica microspheres encapsulating phase-change material by sol-gel method in O/W emulsionJournal of Microencapsulation, 2006
- Observation of multiple phase transitions in n-C22H46 using a high resolution and super-sensitive DSCThermochimica Acta, 2003
- Hydrophile–lipophile balance and solubility parameter of cationic surfactantsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- Alternation of spin-lattice relaxation times for even and odd linear alkane crystals: a high-resolution solid-state NMR studyThe Journal of Physical Chemistry, 1989