Numerical simulation of Failure Behaviors of CFRP laminates on Hashin model coupled with cohesive elements
Open Access
- 12 July 2018
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 382 (3) , 032062
Abstract
The failure modes of carbon fiber reinforced composites (CFRP) was investigated in this study. A method of combination of Hashin model and cohesive elements was proposed to predict failure behaviors in T300/PR319 and AS carbon/epoxy laminates by FE model, while executing three-point bending test. The result shows that there are differences between the response of two materials during bending test. Fiber compression and matrix tension in T300/PR319 and AS carbon/epoxy appears first relatively. Subsequently delamination occurs in AS carbon/epoxy as a result of cohesive elements. A evaluating method of measuring fracture process displacement was also proposed under new damage criterion.Keywords
This publication has 10 references indexed in Scilit:
- Numerical simulation of Failure Behaviors of CFRP laminates on Hashin model coupled with cohesive elementsIOP Conference Series: Materials Science and Engineering, 2018
- Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer compositesComposites Part B: Engineering, 2017
- A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic compositesComposites Part B: Engineering, 2016
- Predicting strength of fibrous laminates under triaxial loads only upon independently measured constituent propertiesInternational Journal of Mechanical Sciences, 2014
- Fabrication, process simulation and testing of a thick CFRP component using the RTM processComposites Part B: Engineering, 2014
- Numerical simulation of three-point bending fatigue of four-step 3-D braided rectangular composite under different stress levels from unit-cell approachComputational Materials Science, 2012
- Low-velocity impact characteristics and residual tensile strength of carbon fiber composite lattice core sandwich structuresComposites Part B: Engineering, 2011
- Prediction of delamination in braided composite T-piece specimensComposites Science and Technology, 2009
- Static crush experiments and simulations of laminated composite plates and shells with constrained layered dampingComposite Structures, 2008
- Progressive damage modeling in fiber-reinforced materialsComposites Part A: Applied Science and Manufacturing, 2007