Feasibility study of using acoustic signals for online monitoring of the depth of weld in the laser welding of high-strength steels
Authors:
- 9 February 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 223 (4) , 343-361
Abstract
It is a trend to use high-strength steels in the automobile industry because of their good formability, weldability, and high strength—volume ratio. In order to achieve quality control, it is necessary to monitor the welding process online. In this paper, acoustic signals generated during the laser welding process of high-strength steel DP980 were recorded and analysed. A microphone was used to acquire the acoustic signals. A spectral subtraction method was used to reduce the noise in the acoustic signals, and a Welch—Bartlett power spectrum density estimation method was used to analyse the frequency characteristics of the acoustic signals. The results indicate that good welds with full penetration (FP) could be clearly distinguished from bad welds with partial penetration (PP). An algorithm based on the different sound pressures between FP and PP was developed to identify the penetration state in the time domain. Another algorithm based on the different frequency characteristics from 500 to 1500 Hz between FP and PP was also developed to differentiate the penetration state. The results show that these two algorithms can effectively distinguish FP from PP. In addition, the mechanisms of the different characteristics of the acoustic signal generated from different penetration depths and modes were also analysed and discussed. This study shows that it is feasible to use acoustic signals to achieve online monitoring of the penetration states during the laser welding of high-strength steel DP980 in a noisy environment by applying proper digital signal processing methods. The acquired acoustic signal could be used as a feedback signal to control the depth of weld penetration in the laser welding process.Keywords
This publication has 17 references indexed in Scilit:
- Review of techniques for on-line monitoring and inspection of laser weldingJournal of Physics: Conference Series, 2005
- Relationship between weld quality and optical emissions in underwater Nd: YAG laser weldingOptics and Lasers in Engineering, 2004
- Feasibility study of acoustic signals for on-line monitoring in short circuit gas metal arc weldingInternational Journal of Machine Tools and Manufacture, 2004
- Real time estimation of CO2 laser weld quality for automotive industryOptics & Laser Technology, 2002
- A statistical approach to acoustic monitoring of laser weldingJournal of Physics D: Applied Physics, 1996
- Resonant acoustic emission during laser welding of metalsJournal of Physics D: Applied Physics, 1996
- Frequency–time characteristics of air-borne signals from laser weldsJournal of Laser Applications, 1996
- Oscillations of the keyhole in penetration laser beam weldingJournal of Physics D: Applied Physics, 1994
- Dynamic behaviour of the keyhole in laser weldingJournal of Physics D: Applied Physics, 1993
- Suppression of acoustic noise in speech using spectral subtractionIEEE Transactions on Acoustics, Speech, and Signal Processing, 1979