Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector Analysis
Authors:
- Shahin Hedayati KiaSKShahin Hedayati Kia
- Humberto HenaoHHHumberto Henao
- Gerard-Andre CapolinoGCGerard-Andre Capolino
- 24 September 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 62 (3) , 1866-1878
Abstract
A noninvasive technique for the diagnosis of gear tooth surface damage faults based upon the stator current space vector analysis is presented. The torque oscillation profile produced by the gear tooth surface damage fault in the mechanical torque experimented by the driven electrical machine is primarily investigated. This profile consists of a mechanical impact generated by the fault followed by a damped oscillation that can be identified through the mechanical system torsional natural frequency and damping factor. Through theoretical developments, it is shown that the periodic behavior of this particular shape produces fault-related frequencies in the stator current and harmonics integer multiple of the rotation frequency in the stator current space vector instantaneous frequency. The fault signature related to the gear tooth surface damage fault is predicted through the numerical simulation. The simulation results are validated through experimental tests, illustrating a possible noninvasive gear tooth surface damage fault detection with a fault sensitivity comparable to invasive methods. A dedicated experimental setup, which is based on a 250-W squirrel-cage three-phase induction machine that is shaft connected to a single-stage gear, has been used for this purpose.Keywords
This publication has 28 references indexed in Scilit:
- Condition monitoring of gearboxes using synchronously averaged electric motor signalsMechanical Systems and Signal Processing, 2013
- Fault diagnosis of planetary gearboxes via torsional vibration signal analysisMechanical Systems and Signal Processing, 2013
- Gear and motor fault modeling and detection based on motor current analysisElectric Power Systems Research, 2013
- An integrated electro-mechanical model of motor-gear units—Applications to tooth fault detection by electric measurementsMechanical Systems and Signal Processing, 2012
- Hilbert versus Concordia transform for three-phase machine stator current time-frequency monitoringMechanical Systems and Signal Processing, 2009
- Vibration and current transient monitoring for gearbox fault detection using multiresolution Fourier transformJournal of Sound and Vibration, 2008
- Comparison of localised spalling and crack damage from dynamic modelling of spur gear vibrationsMechanical Systems and Signal Processing, 2006
- Monitoring gear vibrations through motor current signature analysis and wavelet transformMechanical Systems and Signal Processing, 2006
- EARLY DETECTION OF GEAR TOOTH CRACKING USING THE RESONANCE DEMODULATION TECHNIQUEMechanical Systems and Signal Processing, 2001
- GEAR DEFECT DETECTION THROUGH MODEL-BASED WIDEBAND DEMODULATION OF VIBRATIONSMechanical Systems and Signal Processing, 1996