A Nonlinear Model Predictive Control for the Position Tracking of Cable-Driven Parallel Robots
- 28 March 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Robotics
- Vol. 38 (4) , 2597-2616
Abstract
This article proposes a nonlinear model predictive control (NMPC) strategy for the position tracking of cable-driven parallel robots (CDPRs). The NMPC formulation handles explicitly the cable tensions and their limits. Accordingly, the cable tension distribution is performed as an integral part of the NMPC feedback control strategy, which notably allows the CDPR to operate on the wrench-feasible workspace boundaries without failure. In order to integrate the cable tension minimization within the NMPC formulation, the concept of wrench equivalent optimality (WEO) is introduced. The WEO is a nonnegative measure able to evaluate if the wrench generated by a given cable tension vector can be generated by an alternative tension vector with smaller 2-norm. The redundancy resolution performed by means of the minimization of the WEO enables the stability of the closed-loop system to be proved. More precisely, sufficient conditions for the uniform asymptotic stability are deduced using results from the analysis of NMPC schemes without terminal constraints and costs. Furthermore, the proposed NMPC strategy is validated experimentally on a fully constrained 6 degree-of-freedom CDPR.Keywords
Funding Information
- European Unions H2020 Program (H2020/2014-2020)
- HEPHAESTUS project (732513)
- European Union through FEDER (49793)
This publication has 64 references indexed in Scilit:
- An apologia for stabilising terminal conditions in model predictive controlInternational Journal of Control, 2013
- Optimal Path Planning of Spatial Cable Robot Using Optimal Sliding Mode ControlInternational Journal of Advanced Robotic Systems, 2012
- On the determination of the force distribution in overconstrained cable-driven parallel mechanismsMeccanica, 2010
- Dynamic Load Carrying Capacity of Flexible Cable Suspended Robot: Robust Feedback Linearization Control ApproachJournal of Intelligent & Robotic Systems, 2010
- Wire Robots Part I: Kinematics, Analysis & Design2008
- Predictive functional control of a parallel robotControl Engineering Practice, 2005
- Motion Control of a Tendon-BasedParallel Manipulator Using Optimal Tension DistributionIEEE/ASME Transactions on Mechatronics, 2004
- Planar Translational Cable‐Direct‐Driven RobotsJournal of Robotic Systems, 2003
- Constrained model predictive control: Stability and optimalityAutomatica, 2000
- Sliding controller design for non-linear systemsInternational Journal of Control, 1984