Cylindrical hot refractory anode vacuum arc (CHRAVA)
Authors:
- 1 September 2018
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 89 (9) , 095109
Abstract
We present a study of a novel vacuum arc deposition system composed of a water-cooled aluminum cathode and a hot refractory anode. The plasma of the arc system was diagnosed using a cylindrical electrostatic probe. It was found that the mean electron temperature was ∼2 eV, the plasma density could be varied in the range of 0.5–6 × 1016 m−3, and the ion flux was between 0.06 and 0.35 A m−2. Optical emission spectroscopy measurements showed the presence of emission lines corresponding to Al i and Al ii. The characterization of the coatings showed that the deposition rate varied from 0.8 to 4 nm/s and the surface roughness (Ra) of the films was as low as 25 nm. We demonstrated that it was possible to deposit films with low macroparticle densities, overcoming the principal disadvantage of the vacuum arc process. Measurements of the arc voltage and current were performed as a function of time and the applied magnetic field. The anode temperature was measured using a pyrometer through a ZnS window as a function of time and arc current, and the maximum value was 1800 °C with heating rates of up to 110 °C/s.Keywords
Funding Information
- Secretaría de Ciencia, Humanidades, Tecnología e Innovación (252972, 39953)
- Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México (IN112111, IN112608, IN103806)
This publication has 27 references indexed in Scilit:
- Correlation between target surface and layer nucleation in the synthesis of Al–Cr–O coatings deposited by reactive cathodic arc evaporationSurface and Coatings Technology, 2010
- Metallic film deposition using a vacuum arc plasma source with a refractory anodeSurface and Coatings Technology, 2009
- Copper film deposition by a hot refractory anode vacuum arcSurface and Coatings Technology, 2004
- The hot refractory anode vacuum arc: a new plasma source for metallic film depositionSurface and Coatings Technology, 2000
- Review of cathodic arc deposition technology at the start of the new millenniumSurface and Coatings Technology, 2000
- Cathodic arc sources and macroparticle filteringSurface and Coatings Technology, 1997
- Synthesis and characterization of thin films of WCx produced by mixing W and C plasma streamsSurface and Coatings Technology, 1997
- Ion current distribution in a filtered vacuum arc deposition systemSurface and Coatings Technology, 1995
- Formation of metal oxides by cathodic arc depositionSurface and Coatings Technology, 1995
- PROBE METHODS IN PLASMA RESEARCHSoviet Physics Uspekhi, 1964