Fatigue behavior of surfaced C45 steel
Open Access
- 21 October 2021
- journal article
- research article
- Published by Springer Nature in Journal of Engineering and Applied Science
- Vol. 68 (1) , 1-11
Abstract
Due to the dynamic loads in power transmission such as automotive, the restoration of axles during maintenance is extensively needed. These parts face two main challenges: wear and fatigue failure loads. The present study tries to improve fatigue strength of C45 steel by surfacing with tungsten inert gas (TIG) welding technique using filler ER80S-B2. Fatigue life was studied through a rotary bending fatigue test at two stress levels: level I 65% and level II 55% of the ultimate tensile strength of C45 base steel. Loading amplitude, coating thickness, surface roughness, and rotating speed were kept constant for all specimens. In accordance with ISO 12107, both surfaced and unsurfaced steel fatigue specimens were prepared. The specimens were tested till failure and the data were analyzed. The chemical composition, tensile strength, micro-hardness, microstructure, and fracture surface have been examined for surfaced and unsurfaced steels. Surfaced C45 steel showed improved fatigue life compared to the unsurfaced C45 steel specimens with an increasing percentage of 35.97% at level I and 25.46% at level II.Keywords
This publication has 18 references indexed in Scilit:
- A two-parameter, heat energy-based approach to analyse the mean stress influence on axial fatigue behaviour of plain steel specimensInternational Journal of Fatigue, 2016
- Energy Fatigue Characteristic of C45 Steel Subjected to Cyclic BendingKey Engineering Materials, 2014
- Tungsten heavy alloy as a filler metal for repair welding of dies for high pressure die castingInternational Journal of Materials Research, 2013
- Improvement in fatigue performance of friction stir welded A6061-T6 aluminum alloy by laser peening without coatingMaterials & Design (1980-2015), 2012
- Fatigue properties of a SAE 4340 steel coated with TiCN by PAPVDInternational Journal of Fatigue, 2007
- HVOF coating of welded surfaces: Fatigue and corrosion behaviour of stainless steel coated with Inconel-625 alloySurface and Coatings Technology, 2006
- Fatigue strength of ultra-fine grained steelsMaterials Science and Engineering: A, 2004
- Fatigue properties of an AISI 1045 steel coated with an electroless Ni-P depositThin Solid Films, 1999
- Fatigue fracture surface analysis in C45 steel specimens using X-Ray fractographyEngineering Fracture Mechanics, 1991
- General aspects for tribological applications of hard particle coatingsWear, 1989