Neutronic investigation of a light water reactor with SiC ceramic as accident tolerant fuel cladding (ATFC) material
Authors:
- Abu Khalid RivaiARAbu Khalid Rivai
- 1 January 2022
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2663 (1) , 070004
Abstract
Development of Accident Tolerant Fuel Cladding (ATFC) materials as the improvement for nuclear safety has increased intensively over the past decade as the lesson-learned from Fukushima Daiichi nuclear accident. Interaction of the zirconium alloy as the cladding material of the reactor with water vapor at high-temperature because of abnormal condition generated the hydrogen gas as the product of oxidation. Silicon carbide ceramic (SiC) is one of ATFC candidates to overcome the issue due to its high-temperature corrosion resistance. The neutronic investigation of SiC fuel cladding for LWR (Light Water Reactor) was done to analyse the feasibility of the material for the reactor from reactor physics view point. SRAC (Standard Reactor Analysis Code) as a deterministic neutronic code with cell and core calculation was used. In this study, the criticality of the reactor system with SiC fuel cladding was calculated and compared with Zircaloy-4 as the referenced standard cladding material for LWR especially PWR (Pressurized Water Reactor). Furthermore, neutron energy spectrum behavior at BOL (Beginning of Life) and EOL (End of Life) and excess reactivity behavior of the LWR core as a function of fuel burnup were calculated. The result showed that the reactivity of SiC cladding reactor core was slightly lower than Zircaloy-4 cladding reactor core. Furthermore, SiC cladding material demonstrated the negative temperature coefficient of reactivity of the reactor core examined, which is an important feature of the safety characteristic of LWR. It is shown that the use of SiC fuel cladding is feasible to be used the LWR reactor from reactor physics view point.Keywords
This publication has 13 references indexed in Scilit:
- Neutronics Assessment of Accident-Tolerant Fuel in Advanced Power Reactor 1400 (APR1400)Atom Indonesia, 2020
- Application and Development Progress of Cr-Based Surface Coatings in Nuclear Fuel Element: I. Selection, Preparation, and Characteristics of Coating MaterialsCoatings, 2020
- Evaluation of BWR Burnup Calculations Using Deterministic Lattice Codes SCALE-6.2, WIMS-10A and CASMO5Energies, 2020
- Recent studies on potential accident-tolerant fuel-cladding systems in light water reactorsNuclear Science and Techniques, 2020
- Development of low-Cr ODS FeCrAl alloys for accident-tolerant fuel claddingJournal of Nuclear Materials, 2018
- Neutronic analysis for accident tolerant cladding candidates in CANDU-6 reactorsAnnals of Nuclear Energy, 2018
- Neutronic evaluation of coating and cladding materials for accident tolerant fuelsProgress in Nuclear Energy, 2016
- Development Status of Accident-tolerant Fuel for Light Water Reactors in KoreaNuclear Engineering and Technology, 2016
- Accident tolerant fuels for LWRs: A perspectiveJournal of Nuclear Materials, 2014
- Design Study of Small Lead-Cooled Fast Reactor Cores Using SiC Cladding and StructureJournal of Power and Energy Systems, 2007