Enhanced Strengthening and Toughening of T6-Treated 7046 Aluminum Alloy through Severe Plastic Deformation
Open Access
Abstract
The 7046 aluminum alloy possesses a favorable fatigue property, corrosion resistance and weldability, but its moderate strength and plasticity limit its wider application and development. In the present study, severe plastic deformation (SPD) was applied prior to T6 treatment to significantly enhance the strength and toughness of the 7046 aluminum alloy. The results show that the alloy processed by four passes of equal channel angular pressing (ECAP) at 300 °C prior to T6 treatment exhibits an excellent mechanical performance, achieving an ultimate tensile strength (UTS) and elongation (EL) of 485 MPa and 19%, respectively, which are 18.6% and 375% higher than that of the T6 alloy. The mechanical properties of the alloy are further improved by an additional room temperature (RT) rolling process, resulting in a UTS of 508 MPa and EL of 23.4%, respectively. The increased presence of η′ and Al6Mn phases in the 300°C4P-R80%-T6 and 300°C4P-T6 alloys contributes to a strengthening and toughening enhancement in the SPD-processed T6 alloy. The findings from this work may shed new insights into enhancing the 7046 aluminum alloy.Keywords
All Related Versions
Funding Information
- National Natural Science Foundation of China (52303390, B230201002, 2021M690860, BE2021027, SJC2023005, SZS2023023)
- Fundamental Research Funds for the Central Universities (52303390, B230201002, 2021M690860, BE2021027, SJC2023005, SZS2023023)
- China Postdoctoral Science Foundation (52303390, B230201002, 2021M690860, BE2021027, SJC2023005, SZS2023023)
- Jiangsu Provincial Key Research and Development Program (52303390, B230201002, 2021M690860, BE2021027, SJC2023005, SZS2023023)
- Suzhou Science and Technology Project (52303390, B230201002, 2021M690860, BE2021027, SJC2023005, SZS2023023)
This publication has 58 references indexed in Scilit:
- Temperature-dependent-composition of η phase in an Al-Zn-Mg-Cu alloy under high pressure torsion: Kinetics and thermodynamicsActa Materialia, 2022
- Precipitation kinetics in metallic alloys: Experiments and modelingActa Materialia, 2021
- Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloyActa Materialia, 2018
- Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsionActa Materialia, 2018
- Transmission electron microscopy investigation of separated nucleation and in-situ nucleation in AA7050 aluminium alloyActa Materialia, 2018
- Structure and properties of AlMg alloy after combination of ECAP and post-ECAP ageingArchives of Civil and Mechanical Engineering, 2016
- Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloyActa Materialia, 2014
- Effect of second phase particles on grain refinement during equal-channel angular pressing of an Al–Mg–Mn alloyActa Materialia, 2012
- Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloyActa Materialia, 2009
- Microstructural dependence of fracture toughness in high-strength 7000 forging alloysEngineering Fracture Mechanics, 2008