Locally sulfonated poly(ether sulfone)s with highly sulfonated units as proton exchange membrane
Authors:
- 27 May 2009
- journal article
- research article
- Published by Wiley in Journal of Polymer Science Part A: Polymer Chemistry
- Vol. 47 (13) , 3444-3453
Abstract
Novel locally sulfonated poly(ether sulfone)s with highly sulfonated units were successfully synthesized for fuel cell applications. Poly(ether sulfone)s were prepared by the nucleophilic substitution of bis(4‐fluorophenyl) sulfone with 1,2,4,5‐tetrakis([1,1′‐biphenyl]‐2‐oxy)‐3,6‐bis(4‐hydroxyphenoxy)benzene and bis(4‐hydroxyphenyl) sulfide, followed by oxidation using m‐chloroperoxybenzoic acid. The desired highly sulfonated units were easily introduced by postsulfonation and each one had ten sulfonic acid groups. The sulfonated polymers gave tough, flexible, and transparent membranes by solvent casting. The high contrast in polarity between highly sulfonated units and hydrophobic poly(ether sulfone) units enabled the formation of defined phase‐separated structures and well‐connected proton paths. The sulfonated polymers exhibited excellent proton conductivity over a wide range of relative humidities. The proton conductivity of the sulfonated polymer with an ion exchange capacity value of 2.38 mequiv/g was comparable to that of Nafion 117 even at 30% relative humidity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3444–3453, 2009Keywords
This publication has 29 references indexed in Scilit:
- Ionomers for proton exchange membrane fuel cells with sulfonic acid groups on the end‐groups: Novel branched poly(ether‐ketone)s with 3,6‐ditrityl‐9H‐carbazole end‐groupsJournal of Polymer Science Part A: Polymer Chemistry, 2008
- Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applicationsJournal of Polymer Science Part A: Polymer Chemistry, 2008
- Aromatic Poly(ether ketone)s with Pendant Sulfonic Acid Phenyl Groups Prepared by a Mild Sulfonation Method for Proton Exchange MembranesMacromolecules, 2007
- The Chemical and Structural Nature of Proton Exchange Membrane Fuel Cell PropertiesFuel Cells, 2005
- Alternative Polymer Systems for Proton Exchange Membranes (PEMs)Chemical Reviews, 2004
- State of Understanding of NafionChemical Reviews, 2004
- Synthesis and properties of new sulfonated poly(p-phenylene) derivatives for proton exchange membranes. IPolymer, 2004
- Proton-conducting polymer electrolyte membranes based on hydrocarbon polymersProgress in Polymer Science, 2000
- Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applicationsJournal of Membrane Science, 2000
- Proton-conducting polymers derived from poly(ether-etherketone) and poly(4-phenoxybenzoyl-1,4-phenylene)Solid State Ionics, 1998