Model predictive control of SCR aftertreatment system
Authors:
- 1 June 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21562318,p. 2058-2063
Abstract
The urea-water-solution based selective catalyst reduction(SCR) system is one of the effective device to reduce the NOx emission of diesel engines. In order to realize the SCR technology in automotive application, a model-based approach is used for controller design in this paper. NOx emission must be regulated while NH3 slip is maintained at acceptable level even during the transient driving cycle. The existence of SCR model, pointwise-in-time constraints and multiple control objectives motivate the application of model-based optimization-control approaches such as model predictive control(MPC). The closed-loop simulation result shows that the thermal dynamics in the system must be captured in order to achieve optimal conversion efficiency and minimum NH3 slip. The closed-loop simulation based on engine-out data in a FTP test cycle shows an average NOx reduction of 93%, while the ammonia slip is kept at an average value of 10 ppm.Keywords
This publication has 6 references indexed in Scilit:
- Characterisation and Model Based Optimization of a Complete Diesel Engine/SCR SystemSAE International Journal of Advances and Current Practices in Mobility, 2009
- Model Based Analysis and Control Design of a Urea-SCR deNOx Aftertreatment SystemJournal of Dynamic Systems, Measurement, and Control, 2005
- Modeling and Control of a Urea-SCR Aftertreatment SystemSAE International Journal of Advances and Current Practices in Mobility, 2005
- Advances in catalytic removal of NOx under leanburn conditionsChinese Science Bulletin, 2004
- Introduction to Modeling and Control of Internal Combustion Engine Systems2004
- NOx-Reduction in Diesel Exhaust Gas with Urea and Selective Catalytic ReductionCombustion Science and Technology, 1996