Abstract
This study investigates the efficacy of Recycled Concrete Powder (RCP) as a cement-free slurry treatment for enhancing the physical properties of Recycled Concrete Aggregates (RCA). To elucidate the critical influence of aggregate origin and chemical condition, two distinct RCA types were examined: an industrially produced, old aggregate (RB) and a laboratory-produced, young aggregate (YNG). The experimental program utilized RCP slurries, calcium hydroxide pre-treatments, and combined methods, evaluating their effects through water absorption, open porosity measurements, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Results demonstrate that treatment efficiency is strongly governed by the residual portlandite content within the adhered mortar. The young YNG aggregates exhibited significant reductions in water absorption (up to 14.2%) and microstructural densification, driven by active pozzolanic reactions between the RCP and intrinsic portlandite. In contrast, the old RB aggregates showed limited improvement (maximum 4.2%) due to carbonation-induced calcium depletion, which restricted chemical interactions and confined improvements to physical pore-blocking mechanisms near the surface. These findings indicate that while RCP slurry offers a promising, low-carbon strategy for aggregate valorization, its performance is intrinsically dependent on the service history and residual reactivity of the parent concrete.

This publication has 27 references indexed in Scilit: