Influence of the Cooling Method on Cutting Force and Recurrence Analysis in Polymer Composite Milling
Open Access
Abstract
This work investigates the milling of the surface of glass and carbon fiber-reinforced plastics using tools with a polycrystalline diamond insert. The milling process was conducted under three different conditions, namely without the use of a cooling liquid, with oil mist cooling, and with emulsion cooling. The milling process of composites was conducted with variable technological parameters. The variable milling parameters were feed per tooth and cutting speed. The novelty of this work is the use of recurrence methods based on the cutting force signal to analyze the milling of composites with three types of cooling. The primary aim of the study was to determine the effect of variable technological milling parameters on cutting force and to select recurrence quantifications that would be sensitive to the cooling method. It has been shown that recurrence quantifications such as determinism (DET), laminarity (LAM), averaged diagonal length (L), trapping time (TT), recurrence time of the second type (T2), and entropy (ENTR) are sensitive to the cooling methods applied for the tested composite materials. The results have shown that it is possible to determine common ranges of changes in sensitive recurrence quantifications for the two tested variables parameters of milling: 0.63–0.94 (DET), 0.69–0.97 (LAM), 7.30–13.48 (L), 2.92–4.98 (TT), 17.01–38.25 (T2), 2.02–3.16 (ENTR). The ANOVA analysis results have confirmed that the studied variables have a significant impact on the recurrence quantifications.Keywords
Funding Information
- Politechnika Lubelska (FD-20/IM-5/016)
This publication has 51 references indexed in Scilit:
- A review on the machining of polymer composites reinforced with carbon (CFRP), glass (GFRP), and natural fibers (NFRP)Discover Mechanical Engineering, 2023
- Machining and optimization of reinforced copper composites using different cooling-lubrication conditionsJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
- Effect of Milling Parameters on the Formation of Surface Defects in Polymer CompositesMaterials Science, 2022
- Machinability investigations on CFRP composites: a comparison between sustainable cooling conditionsThe International Journal of Advanced Manufacturing Technology, 2021
- Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditionsThe International Journal of Advanced Manufacturing Technology, 2017
- Recurrence quantification analysis to estimating surface roughness in finish turning processesThe International Journal of Advanced Manufacturing Technology, 2016
- Investigating the fluctuations in tool vibration during GFRP drilling through recurrence quantification analysisJournal of Mechanical Science and Technology, 2015
- Influence of the lubricoolant strategy on thermo-mechanical tool loadCIRP Journal of Manufacturing Science and Technology, 2014
- Dynamical changes during composite milling: recurrence and multiscale entropy analysisThe International Journal of Advanced Manufacturing Technology, 2011
- Embeddings and delays as derived from quantification of recurrence plotsPhysics Letters A, 1992