Anticorrosion Study for Brass Alloys in Heat Exchangers during Acid Cleaning Using Novel Gemini Surfactants Based on Benzalkonium Tetrafluoroborate
Open Access
- 20 May 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (21) , 17849-17860
Abstract
For a variety of applications, the brass alloy has been utilized to replace titanium tubes in heat exchangers. Copper alloys' high corrosion rate during the acid cleaning procedure remains a significant concern. To inhibit the corrosion of brass alloys, we prepared two novel gemini surfactants (GSs), N 1,N 3-dibenzyl-N 1,N 1,N 3,N 3-tetramethylpropane-1,3-diaminium tetrafluoroborate (I H) and N 1,N 1,N 3,N 3-tetramethyl-N 1,N 3-bis (4-methyl benzyl) propane-1,3-diaminium tetrafluoroborate (I Me), and they were characterized using Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy. Their inhibition performance against corrosion of brass alloys in 1 M HCl was studied using electrochemical techniques including potentiodynamic polarization (PP), electrochemical impedance spectroscopy, and electrochemical frequency modulation. The inhibition effect of the synthesized compounds was high, and it increased as the inhibitor's concentration was increased. The maximum level of inhibition efficiency was achieved at an inhibitor concentration of 100 ppm, reaching 96.42% according to PP measurements. From Langmuir data, the mechanisms of adsorption of the two GSs on the surface of copper was found to be physisorption and chemisorption adsorption. X-ray photoelectron spectroscopy and scanning electron microscopy show that the addition of the two compounds lowers the dissolution of brass ions in the corrosive solution and forms a protective layer on the surface of the brass.Keywords
Funding Information
- Taif University (TURSP-2020/56)
This publication has 64 references indexed in Scilit:
- Failure investigation of brass heat exchanger tubeEngineering Failure Analysis, 2012
- Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and ZnApplied Surface Science, 2010
- Synthesis and properties of ionic liquid-type Gemini imidazolium surfactantsJournal of Colloid and Interface Science, 2008
- Synthesis, characterization and properties of geminal imidazolium ionic liquidsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2007
- Electrochemical corrosion of unalloyed copper in chloride media––a critical reviewCorrosion Science, 2004
- Mechanism of dissolution of a Cu–13Sn alloy in low aggressive conditionsCorrosion Science, 2003
- Impedance spectroscopic study of corrosion inhibition of copper by surfactants in the acidic solutionsCorrosion Science, 2003
- Corrosion inhibition of iron in 1 M HCl by some gemini surfactants in the series of alkanediyl-α,ω-bis-(dimethyl tetradecyl ammonium bromide)Progress in Organic Coatings, 2001
- Mass‐Transport Study for the Electrodissolution of Copper in 1M Hydrochloric Acid Solution by ImpedanceJournal of the Electrochemical Society, 1993
- The Effect of Temperature on the Acidic Dissolution of Steel in the Presence of InhibitorsCorrosion, 1990