Two Players Make a Formidable Combination: In Situ Generated Poly(acrylic anhydride-2-methyl-acrylic acid-2-oxirane-ethyl ester-methyl methacrylate) Cross-Linking Gel Polymer Electrolyte toward 5 V High-Voltage Batteries
Authors:
Open Access
- 14 November 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (47) , 41462-41472
Abstract
Electrochemical performance of high-voltage lithium batteries with high energy density is limited because of the electrolyte instability and the electrode/electrolyte interfacial reactivity. Hence, a cross-linking polymer network of poly(acrylic anhydride-2-methyl-acrylic acid-2-oxirane-ethyl ester-methyl methacrylate) (PAMM)-based electrolyte was introduced via in situ polymerization inspired by “shuangjian hebi”, which is a statement in a traditional Chinese Kungfu story similar to the synergetic effect of 1 + 1 > 2. A poly(acrylic anhydride) and poly(methyl methacrylate)-based system is very promising as electrolyte materials for lithium-ion batteries, in which the anhydride and acrylate groups can provide high voltage resistance and fast ionic conductivity, respectively. As a result, the cross-linking PAMM-based electrolyte possesses a significant comprehensive enhancement, including electrochemical stability window exceeding 5 V vs Li+/Li, an ionic conductivity of 6.79 × 10–4 S cm–1 at room temperature, high mechanical strength (27.5 MPa), good flame resistance, and excellent interface compatibility with Li metal. It is also demonstrated that this gel polymer electrolyte suppresses the negative effect resulting from dissolution of Mn2+ ions at 25 and 55 °C. Thus, the LiNi0.5Mn1.5O4/Li and LiNi0.5Mn1.5O4/Li4Ti5O12 cells using the optimized in situ polymerized cross-linking PAMM-based gel polymer electrolyte deliver stable charging/discharging profiles and excellent rate performance at room temperature and even at 55 °C. These findings suggest that the cross-linking PAMM is an intriguing candidate for 5 V class high-voltage gel polymer electrolyte toward high-energy lithium-on batteries.Keywords
Funding Information
- China Postdoctoral Science Foundation (2017M612366)
- Chinese Academy of Sciences (XDA09010105)
- Think-Tank Mutual Fund of Qingdao
- Qingdao Science and Technology Program (17-1-1-26-jch)
- Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences
This publication has 52 references indexed in Scilit:
- Challenges for rechargeable batteriesJournal of Power Sources, 2011
- Electrolyte Additive in Support of 5 V Li Ion ChemistryJournal of the Electrochemical Society, 2011
- A review of the features and analyses of the solid electrolyte interphase in Li-ion batteriesElectrochimica Acta, 2010
- Effect of ether group on the electrochemical stability of zwitterionic imidazolium compoundsElectrochemistry Communications, 2008
- Nanomaterials for Rechargeable Lithium BatteriesAngewandte Chemie International Edition, 2008
- Changes of LiCoO[sub 2] Cathode Material for Lithium-Ion Battery during Long CyclingElectrochemical and Solid-State Letters, 2007
- High-Power Nanostructured LiMn2-xNixO4 High-Voltage Lithium-Ion Battery Electrode Materials: Electrochemical Impact of Electronic Conductivity and MorphologyChemistry of Materials, 2006
- Comparative Study of LiNi0.5Mn1.5O4-δ and LiNi0.5Mn1.5O4 Cathodes Having Two Crystallographic Structures: Fd3̄m and P4332Chemistry of Materials, 2004
- Topotactic Two-Phase Reactions of Li[Ni[sub 1/2]Mn[sub 3/2]]O[sub 4] (P4[sub 3]32) in Nonaqueous Lithium CellsJournal of the Electrochemical Society, 2004
- Influence of the Cr Content on the Li Deinsertion Behavior of the LiCr[sub y]Mn[sub 2−y]O[sub 4] (0≤y≤1) Compounds: I. Separation of Bulk and Superficial Processes at High VoltageJournal of the Electrochemical Society, 2001