Production of Light Oil by Oxidative Cracking of Oil Sand Bitumen Using Iron Oxide Catalysts in a Steam Atmosphere
- 10 November 2010
- journal article
- research article
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 25 (2) , 524-527
Abstract
No abstract availableKeywords
This publication has 9 references indexed in Scilit:
- Heavy oil upgrading in the presence of high density water: Basic studyThe Journal of Supercritical Fluids, 2010
- Recovery of useful lighter fuels from petroleum residual oil by oxidative cracking with steam using iron oxide catalystChemical Engineering Science, 2010
- Effect of 1-Methylnaphthalene Solvent on Cracking of Oil Sand Bitumen with Iron Oxide Catalyst in Steam AtmosphereJournal of the Japan Petroleum Institute, 2010
- Recovery of Lighter Fuels by Cracking Heavy Oil with Zirconia−Alumina−Iron Oxide Catalysts in a Steam AtmosphereEnergy & Fuels, 2009
- A Review of Slurry-Phase Hydrocracking Heavy Oil TechnologyEnergy & Fuels, 2007
- Recovery of Lighter Fuels from Petroleum Residual Oil by Oxidative Cracking with Steam over Zr–Al–FeOx CatalystChemistry Letters, 2006
- Recovery of Useful Hydrocarbons from Petroleum Residual Oil by Catalytic Cracking with Steam over Zirconia-Supporting Iron Oxide CatalystEnergy & Fuels, 2004
- Liquid-Phase Behavior during the Cracking of AsphaltenesIndustrial & Engineering Chemistry Research, 2003
- Hydrothermal Visbreaking of Bitumen in Supercritical Water with Alkali.Journal of the Japan Petroleum Institute, 2002