Pre-heated dual-cured resin cements: analysis of the degree of conversion and ultimate tensile strength
Open Access
- 1 April 2011
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 25 (2) , 174-179
Abstract
This study evaluated the degree of conversion (DC) and ultimate tensile strength (UTS) of dual-cured resin cements heated to 50º C prior to and during polymerization. Disc- and hourglass-shaped specimens of Rely X ARC (RX) and Variolink II (VII) were obtained using addition silicon molds. The products were manipulated at 25º C or 50º C and were subjected to 3 curing conditions: light-activation through a glass slide or through a pre-cured 2-mm thick resin composite disc, or they were allowed to self-cure (SC). All specimens were dark-stored dry for 15 days. For DC analysis, the resin cements were placed into the mold located on the center of a horizontal diamond on the attenuated total reflectance element in the optical bench of a Fourier Transformed Infrared spectrometer. Infrared spectra (n = 6) were collected between 1680 and 1500 cm-1, and DC was calculated by standard methods using changes in ratios of aliphatic-to-aromatic C=C absorption peaks from uncured and cured states. For UTS test, specimens (n = 10) were tested in tension in a universal testing machine (crosshead speed of 1 mm/min) until failure. DC and UTS data were submitted to 2-way ANOVA, followed by Tukey's test (α= 5%). Both products showed higher DC at 50º C than at 25º C in all curing conditions. No significant difference in UTS was noted between most light-activated groups at 25º C and those at 50º C. VII SC groups showed higher UTS at 50º C than at 25º C (p < 0.05). Increased temperature led to higher DC, but its effects on resin cement UTS depended on the curing condition.Keywords
This publication has 23 references indexed in Scilit:
- Composite pre-heating: Effects on marginal adaptation, degree of conversion and mechanical propertiesDental Materials, 2010
- Effect of curing mode on the polymerization characteristics of dual-cured resin cement systemsJournal of Dentistry, 2008
- Influence of ceramic thickness on mechanical properties and polymer structure of dual-cured resin luting agentsDental Materials, 2008
- Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cementsDental Materials, 2008
- Effect of composite temperature on in vitro intrapulpal temperature riseDental Materials, 2007
- Effect of Curing Mode on Microtensile Bond Strength to Dentin of Two Dual-cured Adhesive Systems in Combination with Resin Luting Cements for Indirect RestorationsOperative Dentistry, 2007
- Clinically Relevant Issues Related to Preheating CompositesJournal of Esthetic and Restorative Dentistry, 2006
- Calibration of FTIR conversion analysis of contemporary dental resin compositesDental Materials, 1990
- Correlation of Parameters used to Estimate Monomer Conversion in a Light-cured CompositeJournal of Dental Research, 1988
- Methacrylate-based polymeric dental materials: Conversion and related properties: Summary and ReviewActa Odontologica Scandinavica, 1982