A Thermal‐Ball‐Valve Structure Separator for Highly Safe Lithium‐Ion Batteries
Authors:
Abstract
The separator located between the positive and negative electrodes not only provides a lithium‐ion transmission channel but also prevents short circuits for direct contact of electrodes. The inferior dimension thermostability of commercial polyolefin separators intensifies the thermal runaway of batteries under abuse such as short circuits, overcharge, and so on. a polyvinylidene fluoride/polyether imide (PVDF/PEI) separator with high thermal stability in which the high thermostable PEI microspheres are evenly dispersed in the PVDF film matrix and also located in the micro holes of the PVDF film is developed. They not only function as strong skeleton that enables the rare shrink of the separator at 200 °C avoiding short circuit but also act as ball valve that blocks the lithium ion transmission channel at 150 °C interrupting the further heat aggregation. Thus, the LiNi0.6Co0.2Mn0.2O2/Li batteries exhibit high cycle stability of 96.5% capacity retention after 100 cycles at 0.2C and 80°C. Further, the LiNi0.6Co0.2Mn0.2O2/graphite pouch cells are constructed and deliver good safety performance without smoke release and catching fire after the nail penetration test.Keywords
Funding Information
- National Natural Science Foundation of China (52102261, 52103111)
- Natural Science Foundation of Jiangsu Province (BK20210942)
- Natural Science Foundation of Anhui Province (2208085QB34)
- National College Students Innovation and Entrepreneurship Training Program (202310357027, 202310357028)
This publication has 52 references indexed in Scilit:
- Electroactive phases of poly(vinylidene fluoride): Determination, processing and applicationsProgress in Polymer Science, 2014
- Thermal runaway caused fire and explosion of lithium ion batteryJournal of Power Sources, 2012
- Autonomic Shutdown of Lithium‐Ion Batteries Using Thermoresponsive MicrospheresAdvanced Energy Materials, 2012
- Electrical Energy Storage for the Grid: A Battery of ChoicesScience, 2011
- Preparation of PVdF nanofiber membranes by electrospinning and their use as secondary battery separatorsJournal of Membrane Science, 2011
- A Critical Review of Thermal Issues in Lithium-Ion BatteriesJournal of the Electrochemical Society, 2011
- Key challenges in future Li-battery researchPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Building better batteriesNature, 2008
- Battery SeparatorsChemical Reviews, 2004