Fabrication and hardness of in-situ Al3Ti–Al2O3 composite
Authors:
- Binh N. DuongBDBinh N. Duong
- Binh T. DoBDBinh T. Do
- Dung D. DangDDDung D. Dang
- Huy D. TranHTHuy D. Tran
Open Access
- 5 September 2023
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 10, 1265903
Abstract
In this work, an in-situ Al3Ti–Al2O3 composite was optimally synthesized from raw powders via mechanical milling and conventional sintering processes. The strong influence of milling time on the promotion of the phase reaction between the initial TiO2 and Al materials was proven by using X-ray diffraction and surface morphology analysis. The obtained results showed that the milling process did not initiate any reaction between the raw TiO2 and Al materials. However, the milling process was important for creating a homogeneous powder mixture and refining the particle size of the powders. The Al3Ti–Al2O3 composites were completely formed after conventional sintering at 750°C for 30 min for a milling time of over 4 h. The highest obtained microhardness of the composite was approximately 130 HV, which was suggested to be related to the microstructure of the bulk composite specimen consisting of two main phases, the Al3Ti matrix and the Al2O3 particles dispersed in the matrix. A small portion of an unidentified phase, a Ti-rich compound, was found in the matrix together with a tiny fraction of AlTi3. We suggest that the optimal sintering process and mechanical milling are important key factors in fabricating bulk hardness Al3Ti–Al2O3 composite materials.Keywords
This publication has 24 references indexed in Scilit:
- Reactive mechanism and mechanical properties of in situ composites fabricated from an Al–TiO2 system by friction stir processingActa Materialia, 2012
- In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 systemMaterials Letters, 2011
- Synthesis of TiAl3-Al2O3Composite Particles by Chemical Reactions in Molten SaltsMaterials and Manufacturing Processes, 2010
- Microstructure of in situ Al3Ti/6351Al composites fabricated with electromagnetic stirring and fluxesTransactions of Nonferrous Metals Society of China, 2010
- Synthesis and stability of L12–Al3Ti by mechanical alloyingMaterials Science and Engineering: A, 2004
- Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basisIntermetallics, 2001
- Processing of intermetallic compounds for structural applications at high temperatureIntermetallics, 1996
- A novel technique for fabricatingin situ Al2O8/Ti x Al y compositesJournal of Materials Science Letters, 1993
- Thermodynamic Assessment and Calculation of the Ti-Al SystemMetallurgical Transactions A, 1992
- Preparation of intermetallic compound matrix composites by reaction squeeze castingJournal of Materials Science Letters, 1991