Dielectric behavior and properties of a cyanate ester containing dicyclopentadiene. I
Authors:
- 5 April 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 96 (6) , 2079-2089
Abstract
2,6‐Dimethyl phenol dicyclopentadiene dicyanate ester (DCPDCY) was synthesized through the reaction of 2,6‐dimethyl phenol dicyclopentadiene novolac and cyanogen bromide. The proposed structure was confirmed by Fourier transform infrared, mass spectrometry, NMR spectrometry, and elemental analysis. DCPDCY was then cured by itself or cured with bisphenol A dicyanate ester (BADCY) to form triazine structures. The thermal properties of the cured DCPDCY resins were studied with differential scanning calorimetry, dynamic mechanical analysis (DMA), dielectric analysis, and thermogravimetric analysis; these data were compared with those of BADCY. The cured DCPDCY resins exhibited a lower dielectric constant (2.58 at 1 MHz), a lower dissipation factor (20.2 mU at 1 MHz), less thermal stability (the 5% degradation temperature and char yield were 430°C and 32.1%, respectively), a lower glass‐transition temperature (266°C by thermomechanical analysis and 271°C by DMA), a lower coefficient of thermal expansion (22.5 ppm before the glass‐transition temperature and 124.9 ppm after the glass‐transition temperature), and less moisture absorption (0.88% at 48 h) than BADCY, but they showed higher moduli (6.28 GPa at 150°C and 5.35 GPa at 150°C) than the bisphenol A system. The properties of the cured cocyanate esters (DCPDCY and BADCY) lay between those of cured BADCY and DCPDCY, except for the moduli. The moduli of some cocyanate esters were even higher than those of cured BADCY and DCPDCY. A positive deviation from the Fox equation was observed for cocyanate esters. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2079–2089, 2005Keywords
This publication has 20 references indexed in Scilit:
- Study on PET/PP microfibrillar composites. I. Morphological development in melt extrusionJournal of Applied Polymer Science, 2003
- Enhancement of processability of cyanate ester resin via copolymerization with epoxy resinJournal of Applied Polymer Science, 2002
- Multivariate analysis of spectra of cyanate ester/bismaleimide blends and correlations with propertiesPolymer, 2002
- Polycyanurates modified with hydroxyl-terminated or cyanated poly(ether sulfone)Polymer, 2001
- Effects of molecular weight of polysulfone on phase separation behavior for cyanate ester/polysulfone blendsJournal of Applied Polymer Science, 2000
- A study of the polymerization of novel cyanate ester/acrylate blendsPolymer, 2000
- Characterization of the curing behaviour of cyanic ester by a positron-annihilation lifetime techniquePolymer, 1999
- Amorphous phenolphthalein-basedpoly(arylene ether) modified cyanate ester networks: 1. Effect of molecular weight and backbone chemistry on morphology and toughenabilityPolymer, 1998
- Thermal behavior and properties of naphthalene containing bismaleimide-triazine resinsJournal of Applied Polymer Science, 1998
- Chemistry and Technology of Cyanate Ester Resins1994