Experimental investigation of adaptive Coanda jet control for performance improvement of a highly loaded compressor cascade
- 1 April 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (4)
Abstract
With the increase in the blade load of modern compressors for aircraft engines and gas turbines, flow separation generated in stator blade passages especially under transient flight maneuvers or off-design operating conditions is enhanced. This not only deteriorates the compressor efficiency but also blockages the flow path that may induce instability such as stall or surge. Due to this, an adaptive Coanda jet control (ACJC) system has been developed based on a compressor stator cascade. This system can execute real-time monitoring the flow condition of the stator via an incidence angle prediction model and can inject appropriate air to eliminate flow separation based on an optimal injection mass flow rate prediction model. In order to further validate the active control effects of the ACJC system, this article conducts detailed experimental tests for the stator cascades. Inflow condition matrix is elaborately arranged by considering a wide range of inlet Mach number [0.4, 0.6] and incidence angle [−3°, 5°]. Results indicate that the incidence angle predicted by the ACJC system is nearly the same as the set value. Also, the total pressure loss is dramatically decreased due to the Coanda jet with a mass flow rate predicted by the ACJC system. In addition, compared to the cascade without ACJC under the incidence angel of 5°, the total pressure loss coefficient is reduced by 14.3%, 12.9%, and 17.8% at inflow Mach number being 0.4, 0.5, and 0.6, respectively.Keywords
Funding Information
- National Major Project of Aeroengine and Gas Turbine (J2019-II-0020-0041)
- Strategic Priority Program of the Chinese Academy of Science (XDA29050500)
This publication has 26 references indexed in Scilit:
- Mechanisms of oscillating suction in controlling the tip leakage flow in a high-load compressor cascadeAerospace Science and Technology, 2023
- Aerodynamic Performance Improvement of a Highly Loaded Compressor Airfoil with Coanda Jet FlapJournal of Thermal Science, 2022
- Preliminary study on pulsed jets with three-dimensional effects for flow separation control in a compressor bladeAerospace Science and Technology, 2021
- Comparison of different plasma actuation strategies for aeroelastic control on a linear compressor cascadeAerospace Science and Technology, 2021
- Influence of Endwall Air Injection with Discrete Holes on Corner Separation of a Compressor CascadeJournal of Thermal Science, 2021
- A combined application of micro-vortex generator and boundary layer suction in a high-load compressor cascadeChinese Journal of Aeronautics, 2019
- Closed-loop active flow control of a non-steady flow field in a highly-loaded compressor cascadeCEAS Aeronautical Journal, 2016
- Two-dimensional RANS simulations of the flow through a compressor cascade with jet flapsAerospace Science and Technology, 2008
- PCA in studying coordination and variability: a tutorialClinical Biomechanics, 2004
- Flow attachment to solid surfaces: The Coanda effectAIChE Journal, 1972