An array of ordered pillars with retentive properties for pressure-driven liquid chromatography fabricated directly from an unmodified cyclo olefin polymer
- 23 February 2009
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 9 (11) , 1511-1516
Abstract
The current paper describes the development and characterization of a pillar array chip that is constructed out of a sandwich of cyclo olefin polymer (COP) sheets. The silicon master of a 5 cm long pillar array was embossed into the COP, yielding 4.3 µm deep pillars of 15.3 µm diameter with an external porosity of 43 % and a well designed sidewall region to avoid side wall induced band broadening. A closed channel configuration was obtained by pressure assisted thermal bonding to a non-processed COP lid. Injection of coumarin dye plugs and detection with a fluorescence microscope showed very close agreement of this channel configuration to theoretical expectations in terms of band broadening. This agreement is due to the low taper, the optimized sidewall region and the excellent bonding quality between the two polymer sheets, even at the pillar area. Under non-retained conditions (pure methanol as mobile phase), plate heights as low as 4 µm were obtained. Under retained conditions, using the native hydrophobic properties of the COP channel (in 70/30 v/v water/methanol mixture as mobile phase), a minimum plate height of 6 µm was obtained. A 4 component separation was successfully achieved, demonstrating that COP is a cheap and efficient alternative for silicon and silica based liquid chromatography formats.Keywords
This publication has 24 references indexed in Scilit:
- The use of high glass temperature polymers in the production of transparent, structured surfaces using nanoimprint lithographyMicroelectronic Engineering, 2008
- Underivatized cyclic olefin copolymer as substrate material and stationary phase for capillary and microchip electrochromatographyElectrophoresis, 2008
- Experimental Study of Porous Silicon Shell Pillars under Retentive ConditionsAnalytical Chemistry, 2008
- Silane–dextran chemistry on lateral flow polymer chips for immunoassaysLab on a Chip, 2008
- Pressure-Driven Reverse-Phase Liquid Chromatography Separations in Ordered Nonporous Pillar Array ColumnsAnalytical Chemistry, 2007
- Optical lithography—a historical perspectiveComptes Rendus. Physique, 2006
- Experimental Study on Band Dispersion in Channels Structured with MicropillarsAnalytical Chemistry, 2006
- A polymeric microchip with integrated tips and in situ polymerized monolith for electrospray mass spectrometryLab on a Chip, 2005
- Importance and Reduction of the Sidewall-Induced Band-Broadening Effect in Pressure-Driven Microfabricated ColumnsAnalytical Chemistry, 2004
- Hot embossing - The molding technique for plastic microstructuresMicrosystem Technologies, 1998