Evaluation of the mechanical performance of concrete containing calcium carbide residue and nano silica using response surface methodology
- 5 May 2022
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (44) , 67076-67102
Abstract
Calcium carbide residue (CCR) is generated from acetylene gas production, and it is highly alkaline and contains a very high amount of calcium. Nano silica (NS), on the other hand, is mostly used in combination with other pozzolanic materials in concrete to ignite the reactivity of the material and to improve the properties of the concrete. This study investigated the effect of CCR incorporated in concrete mixtures to partially replace cement content at 0 to 30% (interval of 7.5%). NS was used as an additive by weight of binder at levels 0 to 4% in increment of 1%. Thus, response surface methodology (RSM) was employed to investigate the effects of CCR and NS on the properties of the concrete, including compressive strength, flexural strength, splitting tensile strength, modulus of elasticity (MoE), and water absorption. The RSM was used for model development predicted concrete’s properties and carried out mixture multi-objective optimization by maximizing strengths, MoE, and minimizing water absorption. The results showed that using up to 15% CCR improved the strengths, MoE, and water absorption of the concrete. Adding up to 3% NS further enhanced the strengths, MoE, and water absorption significantly. The developed models for predicting the properties of the concrete using RSM were highly efficient with high degree of correlation. The optimization solutions indicated that the best optimum or best mix combination based on maximum strengths and MoE with minimum water absorption was achieved by replacing 10.6% cement with CCR and adding 1.95% NS by the weight of cementitious materials.Keywords
This publication has 33 references indexed in Scilit:
- Green concrete: Prospects and challengesConstruction and Building Materials, 2017
- Influence of Activation Methods on Strength and Chloride Resistance of Concrete Using Calcium Carbide Residue–Fly Ash Mixture as a New BinderJournal of Materials in Civil Engineering, 2017
- Development of eco-efficient self-compacting concrete with waste marble powder using the response surface methodJournal of Cleaner Production, 2017
- Comparative study using Portland cement and calcium carbide residue as a promoter in bottom ash geopolymer mortarConstruction and Building Materials, 2017
- SDA and laterite applications in concrete: Prospects and effects of elevated temperatureCogent Engineering, 2017
- Evaluation of the performance of eco-friendly lightweight interlocking concrete paving units incorporating sawdust wastes and lateriteCogent Engineering, 2016
- Substantial global carbon uptake by cement carbonationNature Geoscience, 2016
- Influence of different types of nano-SiO2 particles on properties of high-performance concreteConstruction and Building Materials, 2016
- Influence of Wet-Dry Cycles on Compressive Strength of Calcium Carbide Residue–Fly Ash Stabilized ClayJournal of Materials in Civil Engineering, 2014
- Effects of Calcium Carbide Residue–Fly Ash Binder on Mechanical Properties of ConcreteJournal of Materials in Civil Engineering, 2010