Analysis of wear properties of Zn-based composites using the Taguchi method
- 28 February 2018
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 60 (3) , 265-272
Abstract
The tribological behavior of composites based on zinc aluminum ZA27 alloy, reinforced with silicon carbide (SiC) and graphite (Gr) particles is analyzed using the Taguchi method and described in this paper. Two sample composites were tested: the first containing 10 % of SiC and the second containing 10 % of SiC and 3 % Gr particles. They were prepared by the compo-casting procedure. The experiments were carried out using a block-on-disc tribometer under dry sliding test conditions. The tests were conducted with sliding speeds of 0.25, 0.5 and 1.0 m×s−1, normal loads of 10, 20 and 30 N and a sliding distance of 300 m. The wear surface of the composite material was examined using scanning electronic microscopy (SEM) and energy dispersive spectrometry (EDS). The influence of various parameters on the wear behavior was investigated by means and analysis of variance (ANOVA).Keywords
This publication has 14 references indexed in Scilit:
- Mechanical Properties and Dry Sliding Wear Behaviour of Molybdenum Disulphide Reinforced Zinc–Aluminium Alloy CompositesTransactions of the Indian Institute of Metals, 2017
- Optimization of tribological properties of aluminum hybrid composites using Taguchi designJournal of Composite Materials, 2016
- Tribological Behavior of Aluminum Hybrid Composites Studied by Application of Factorial TechniquesTribology Transactions, 2016
- Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniquesMaterials & Design (1980-2015), 2014
- Tribological Behavior of Composites Based on ZA-27 Alloy Reinforced with Graphite ParticlesTribology Letters, 2009
- Influence of T4 Heat Treatment on Tribological Behavior of Za27 Alloy Under Lubricated Sliding ConditionTribology Letters, 2009
- Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditionsWear, 2007
- Influence of some material and experimental parameters on the sliding wear behaviour of a zinc-based alloy, its composite and a bronzeWear, 2003
- Effect of aging parameters on the micro structure and properties of ZA-27/aluminite metal matrix compositesJournal of Alloys and Compounds, 2002
- Effect of SiC particle reinforcement on the unlubricated sliding wear behaviour of ZA-27 alloy compositesWear, 1997