The Coupled Effect of Loading Rate and Grain Size on Tensile Strength of Sandstones under Dynamic Disturbance
Authors:
Open Access
- 15 March 2017
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2017, 1-13
Abstract
It is of significance to comprehend the effects of rock microstructure on the tensile strength under different loading rates caused by mining disturbance. So, in this paper, three kinds of sandstones drilled from surrounding rocks in Xiao Jihan Coal to simulate the in situ stress state, whose average grain size is 30 μm (fine grain, FG), 105 μm (medium grain, MG), and 231 μm (Coarse grain, CG), are selected with the calculation of optical microscopic technique and moreover processed to Brazilian disc (BD) to study the mechanical response of samples. The dynamic Brazilian tests of samples with three kinds of grain sizes are conducted with the Split Hopkinson Pressure Bar (SHPB) driven by pendulum hammer, which can produce four different velocities ( m/s, 2.5 m/s, 3.3 m/s, and 4.2 m/s) when the incident bar is impacted by pendulum hammer. The incident wave produced by pendulum hammer is a slowly rising stress wave, which allows gradual stress accumulation in the specimen and maintains the load at both ends of the specimen in an equilibrium state. The results show that the dynamic strength of three kinds of BD samples represented loading rates dependence, and FG sandstones are more sensitive for loading rates than MG and CG samples. Moreover, the peak strength is observed to increase linearly with an increasing stress rates, and the relationship between the dynamic BD strength and stress rates can be built through a linear equation. Finally, the failure modes of different grain sizes are discussed and explained by microfailure mechanism.
Keywords
Funding Information
- National Natural Science Foundation of China (51525402, 51304037, N160104008, N160103005)
- National Natural Science Foundation of China (51525402, 51304037, N160104008, N160103005)
- Fundamental Research Funds for the Central Universities (51525402, 51304037, N160104008, N160103005)
- Fundamental Research Funds for the Central Universities (51525402, 51304037, N160104008, N160103005)
This publication has 31 references indexed in Scilit:
- Effect of water saturation and loading rate on the mechanical properties of Red and Buff SandstonesInternational Journal of Rock Mechanics and Mining Sciences, 2016
- Dynamic tensile failure of rocks under static pre-tensionInternational Journal of Rock Mechanics and Mining Sciences, 2015
- ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend SpecimenRock Mechanics and Rock Engineering, 2013
- Effect of loading rate on fracture toughness and failure micromechanisms in marbleEngineering Fracture Mechanics, 2013
- Static and Dynamic Flexural Strength Anisotropy of Barre GraniteRock Mechanics and Rock Engineering, 2013
- Effect of Thermal Treatment on the Dynamic Fracture Toughness of Laurentian GraniteRock Mechanics and Rock Engineering, 2012
- New model for the indirect determination of the tensile stress–strain curve of concrete by means of the Brazilian testMaterials and Structures, 2012
- A Semi-Circular Bend Technique for Determining Dynamic Fracture ToughnessExperimental Mechanics, 2009
- Determination of dynamic fracture parameters using a semi-circular bend technique in split Hopkinson pressure bar testingEngineering Fracture Mechanics, 2009
- Experimental determination of dynamic tensile properties of a graniteInternational Journal of Rock Mechanics and Mining Sciences, 2000