In Vitro Biocompatibility Evaluation of Novel Urethane–Siloxane Co-Polymers Based on Poly( ϵ -Caprolactone)- block -Poly(Dimethylsiloxane)- block -Poly( ϵ -Caprolactone)
- 8 May 2012
- journal article
- research article
- Published by Taylor & Francis in Journal of Biomaterials Science, Polymer Edition
- Vol. 23 (13) , 1629-1657
Abstract
Novel polyurethane co-polymers (TPUs), based on poly(ϵ-caprolactone)-block-poly(dimethylsiloxane)-block-poly(ϵ-caprolactone) (PCL-PDMS-PCL) as soft segment and 4,4'-methylenediphenyl diisocyanate (MDI) and 1,4-butanediol (BD) as hard segment, were synthesized and evaluated for biomedical applications. The content of hard segments (HS) in the polymer chains was varied from 9 to 63 wt%. The influence of the content and length of the HS on the thermal, surface, mechanical properties and biocompatibility was investigated. The structure, composition and HS length were examined using (1)H- and quantitative (13)C-NMR spectroscopy. DSC results implied that the synthesized TPUs were semicrystalline polymers in which both the hard MDI/BD and soft PCL-PDMS-PCL segments participated. It was found that an increase in the average HS length (from 1.2 to 14.4 MDI/BD units) was accompanied by an increase in the crystallinity of the hard segments, storage moduli, hydrophilicity and degree of microphase separation of the co-polymers. Depending on the HS content, a gradual variation in surface properties of co-polymers was revealed by FT-IR, AFM and static water contact angle measurements. The in vitro biocompatibility of co-polymers was evaluated using the endothelial EA.hy926 cell line and protein adsorption on the polyurethane films. All synthesized TPUs adsorbed more albumin than fibrinogen from multicomponent protein mixture, which may indicate biocompatibility. The polyurethane films with high HS content and/or high roughness coefficient exhibit good surface properties and biocompatible behavior, which was confirmed by non-toxic effects to cells and good cell adhesion. Therefore, the non-cytotoxic chemistry of the co-polymers makes them good candidates for further development as biomedical implants.Keywords
This publication has 53 references indexed in Scilit:
- Optimization of the structure of polyurethanes for bone tissue engineering applicationsActa Biomaterialia, 2010
- Dynamic stress relaxation of thermoplastic elastomeric biomaterialsPolymer, 2009
- Biodegradable Polyurethanes: Synthesis and Applications in Regenerative MedicineTissue Engineering Part B: Reviews, 2008
- The influence of isocyanurate content on the bioperformance of hydrocarbon-based polyurethanesJournal of Biomaterials Science, Polymer Edition, 2008
- Using hydroxyapatite nanoparticles and decreased crystallinity to promote osteoblast adhesion similar to functionalizing with RGDBiomaterials, 2006
- Effect of the degree of soft and hard segment ordering on the morphology and mechanical behavior of semicrystalline segmented polyurethanesPolymer, 2006
- Effect of soft segment length on properties of fluorinated polyurethanesColloids and Surfaces B: Biointerfaces, 2005
- Effects of the Chemical Structure and the Surface Properties of Polymeric Biomaterials on Their BiocompatibilityPharmaceutical Research, 2004
- The influence of composition ratio on the morphology of biomedical polyurethanesJournal of Applied Polymer Science, 1999
- Selected topics in biomedical polyurethanes. A reviewColloid and Polymer Science, 1989