Permittivity transition from highly positive to negative: Polyimide/carbon nanotube composite's dielectric behavior around percolation threshold
Authors:
- 6 July 2015
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 107 (1) , 012905
Abstract
In this report, a series of composite films consisting of polyimide as the matrix and multi-wall carbon nanotubes as the filler (PI/MWCNTs) were prepared in a water-based method with the use of triethylamine. Their dielectric properties were tested under frequency of between 100 Hz and 10 MHz, and it was revealed that the permittivity value behaved interestingly around the percolation threshold (8.01% in volume). The water-based method ensured that fillers had high dispersibility in the matrix before percolation, which led to a relatively high dielectric constant (284.28). However, the overlapping caused by excess MWCNTs created pathways for electrons inside the matrix, turning the permittivity to negative. The former phenomenon was highly congruent with the percolation power law, while the latter could be explained by the Drude Model. AC conductivity was measured for more supportive information. Additionally, scanning electron microscopy and transmission electron microscopy were employed to record MWCNTs' microscopic distribution and morphology at the percolation threshold.Keywords
Funding Information
- Foundation Research Project of Jiangsu
- the Beijing Higher Education Young Elite Teacher
- the Fundamental Research Funds for the Central Universities of China
- The National Key Basic Research Program of China
- The National Natural Science Foundation of China
- the Specialized Research Fund for the Doctoral Program of Higher Education
This publication has 42 references indexed in Scilit:
- Preparation of high k expanded graphite/CaCuTi4O12/cyanate ester composites with low dielectric loss through controlling the interfacial action between conductors and ceramicsComposites Part B: Engineering, 2014
- The electrical conductivity of ethylene butyl-acrylate/carbon black composites: The effect of foaming on the percolation thresholdSynthetic Metals, 2014
- Development of poly(isobutylene-co-isoprene)/reduced graphene oxide nanocomposites for barrier, dielectric and sensingapplicationsMaterials Letters, 2013
- Dielectric properties of reduced graphene oxide/polypropylene composites with ultralow percolation thresholdPolymer, 2013
- Effect of expanded graphite on thermal, mechanical and dielectric properties of ethylene–propylene–diene terpolymer/hexa fluoropropylene–vinylidinefluoride dipolymer rubber blendsEuropean Polymer Journal, 2013
- Fabrication and dielectric properties of oriented polyvinylidene fluoride nanocomposites incorporated with graphene nanosheetsMaterials Chemistry and Physics, 2012
- Nitrile functionalized graphene for poly(arylene ether nitrile) nanocomposite films with enhanced dielectric permittivityMaterials Letters, 2012
- High Dielectric Permittivity and Low Percolation Threshold in Nanocomposites Based on Poly(vinylidene fluoride) and Exfoliated Graphite NanoplatesAdvanced Materials, 2009
- Analysis of electrical, dielectric, and electromagnetic interference shielding behavior of graphite filled high density polyethylene compositesPolymer Engineering & Science, 2008
- Synthesis and dielectric properties of novel high-K polymer composites containing in-situ formed silver nanoparticles for embedded capacitor applicationsJournal of Materials Chemistry, 2006