Abstract
As a new type of intelligent material seal technology, ferrofluid seal has been widely used in high speed, heavy load and large eccentricity occasions in recent years because of its long life, low leakage and high pressure resistance. Because of the limitation of the axial height of the axis, most of the existing studies are focused on the radial parameters, but the specific research on the axial parameters has not yet been carried out. In this study, the theoretical pressure capabilities of height of the distribution of axial teeth and axial slot width was calculated according to the theory of stepped ferrofluid seals by finite element method. And by changing the radial gap, the stepped ferrofluid seal is compared with the ordinary seal, and the calculation results are analysed and discussed. The results show that the distribution mode of the axial teeth has a great influence on the theoretical sealing pressure resistance. And the theoretical sealing pressure resistance reaches the maximum when the distribution mode is evenly distributed. The influence of the width of the axial slot on the theoretical sealing pressure resistance can be neglected, so the technological property and the design should be considered as far as possible. By comparing the stepped seal with the ordinary seal, the practicability of the stepped seal is further verified.

This publication has 1 reference indexed in Scilit: