Tribological Properties of MoN/TiN Multilayer Coatings Prepared via High-Power Impulse Magnetron Sputtering
Open Access
- 22 July 2025
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 13 (8) , 319
Abstract
To address the limitations of single-layer nitride coatings, such as poor load adaptability and low long-term durability, MoN/TiN multilayer coatings were prepared via high-power impulse magnetron sputtering (HiPIMS). HiPIMS produces highly ionized plasmas that enable intense ion bombardment, yielding nitride films with enhanced mechanical strength, durability, and thermal stability versus conventional methods. The multilayer coating demonstrated a low coefficient of friction (COF, ~0.4) and wear rate (1.31 × 10−7 mm3/[N·m]). In contrast, both TiN and MoN coatings failed at 5 N and 10 N loads, respectively. Under increasing loads, the multilayer coating maintained stable wear rates (1.84–3.06 × 10−7 mm3/[N·m]) below 20 N, and ultimately failed at 25 N. Furthermore, the MoN layer contributes to COF reduction. Grazing-incidence X-ray diffraction analysis confirmed the enhanced crystallographic stability of the multilayer coating, thereby revealing a dominant (111) orientation. The multilayer architecture suppresses crack propagation while effectively balancing hardness and toughness, offering a promising design for extreme-load applications.Keywords
Funding Information
- Zhejiang Provincial Natural Science Foundation of China (LQ22E010007, LTZ20E020001, 2023G00007, 22gya09)
- Wenling Key Research and Development Project (LQ22E010007, LTZ20E020001, 2023G00007, 22gya09)
- Taizhou Science and Technology Plan Project (LQ22E010007, LTZ20E020001, 2023G00007, 22gya09)
This publication has 57 references indexed in Scilit:
- Designing TiB2/Cr multilayer coatings on Ti6Al4V substrate for optimized wear resistanceSurface Science and Technology, 2024
- Bilayer period and ratio dependent structure and mechanical properties of TiN/MoN superlatticesActa Materialia, 2024
- Ab initio supported development of TiN/MoN superlattice thin films with improved hardness and toughnessActa Materialia, 2022
- Friction reduction mechanisms of TiN film sliding in graphene aqueous dispersionLubrication Science, 2022
- Impact of structure on mechanical properties and oxidation behavior of magnetron sputtered cubic and hexagonal MoNx thin filmsApplied Surface Science Advances, 2021
- Self-lubricating TiN/MoN and TiAlN/MoN nano-multilayer coatings for drilling of austenitic stainless steelCeramics International, 2019
- Improving the mechanical and tribological properties of TiB2/a-C nanomultilayers by structural optimizationCeramics International, 2018
- Industrial use of HiPIMS and the hiP‐V hiPlus technologyVakuum in Forschung und Praxis, 2017
- Filtered cathodic vacuum Arc deposition of nano-layered composite coatings for machining hard-to-cut materialsThe International Journal of Advanced Manufacturing Technology, 2015
- A micro-abrasive wear test, with particular application to coated systemsSurface and Coatings Technology, 1996