Comparative Evaluation of Cryogenic Air Separation Units from the Exergetic and Economic Points of View
Open Access
- 10 June 2020
- book chapter
- Published by IntechOpen
Abstract
The industrial use of cryogenic air separation units started more than 120 years ago. Cryogenic air separation processes produce pure nitrogen, oxygen, and argon, as well as other noble gases. In cryogenic air separation units, the produced amounts of nitrogen and oxygen vary between 200 and 40,000 Nm 3 / h and 1000 and 150,000 Nm 3 / h , respectively. Different configurations of this process lead to various amounts of gaseous and liquid products. In addition, the purity of the products is affected by the schematic. Oxygen in gaseous or liquid form is typically used in the metallurgical (e.g., steel) industry, in chemical applications (as oxidizer), in power plants (for oxy-fuel combustion processes), as well as in the medical and aerospace sectors. Nitrogen in gaseous or liquid form is used as inert or flushing gas in the chemical industry and as a coolant for different applications. In this chapter, different schematics of air separation units are analyzed. An exergetic analysis is applied in order to identify the thermodynamic inefficiencies and the processes that cause them. Finally, the systems are evaluated from the economic point of view.Keywords
This publication has 24 references indexed in Scilit:
- Process Configurations and Simulations for a Novel Single-Column Cryogenic Air Separation ProcessIndustrial & Engineering Chemistry Research, 2012
- Optimal design and integration of an air separation unit (ASU) for an integrated gasification combined cycle (IGCC) power plant with CO2 captureFuel Processing Technology, 2011
- A new approach to the exergy analysis of absorption refrigeration machinesEnergy, 2008
- An alternate algorithm for the analysis of multistream plate fin heat exchangersInternational Journal of Heat and Mass Transfer, 2006
- Predictive Dynamic Model of Air Separation by Pressure Swing AdsorptionChemical Engineering & Technology, 2006
- Thermal design of multi-stream heat exchangersApplied Thermal Engineering, 2002
- A review of air separation technologies and their integration with energy conversion processesFuel Processing Technology, 2001
- AIR LIQUEFACTION: DISTILLATION2000
- Exergy analysis of cryogenic air separationEnergy Conversion and Management, 1998
- Air separation by a high temperature molten salt processGas Separation & Purification, 1987