Optimized Scheme for Accelerating the Slagging Reaction and Slag–Metal–Gas Emulsification in a Basic Oxygen Furnace
Open Access
- 24 July 2020
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 10 (15) , 5101
Abstract
Basic oxygen furnace (BOF) steelmaking is widely used in the metallurgy field. The slagging reaction is a necessary process that oxidizes C, Mn, Si, P, S, and other impurities and therefore directly affects the quality of the resultant steel. Relevant research has suggested that intensifying the stirring effect can accelerate the slagging reaction and that the dynamic characteristics of the top blow are the key factor in exploring the related complex physical and chemical phenomena. To address the issue, the standard k- turbulence model and level-set method were adopted in the present work and a fluid dynamics model was developed for a BOF. Accordingly, the slag–metal–gas emulsion interaction and stirring effect were investigated, and the interference mechanism of a multi-nozzle supersonic coherent jet was revealed. Finally, a self-adjustment method based on fuzzy control is proposed for the oxygen lance. The results indicate that the transfer efficiency of jet kinetic energy at the gas–liquid interface is the critical factor for the slagging reaction and that multi-nozzle oxygen lances with a certain twisted angle have important advantages with respect to stirring effects and splashing inhibition. The fuzzy control method predicts that the optimal nozzle twist angle is within the range of 7.2° to 7.8°. The results presented herein can provide theoretical support and beneficial reference information for BOF steelmaking.
Keywords
Funding Information
- National Natural Science Foundation of China (No. 51775501)
This publication has 38 references indexed in Scilit:
- Interaction behaviour between top blown jet and molten steel during BOF steelmaking processIronmaking & Steelmaking: Processes, Products and Applications, 2016
- Computational Investigation of Swirling Supersonic Jets Generated Through a Nozzle-Twisted LanceMetallurgical and Materials Transactions B, 2016
- Numerical Simulation of Supersonic Oxygen Jets at High Ambient TemperatureSteel Research International, 2016
- Querying Similar Process Models Based on the Hungarian AlgorithmIEEE Transactions on Services Computing, 2016
- Level-set simulations of buoyancy-driven motion of single and multiple bubblesInternational Journal of Heat and Fluid Flow, 2015
- A mass conserving level set method for detailed numerical simulation of liquid atomizationJournal of Computational Physics, 2015
- Transferring Characteristics of Momentum/Energy during Oxygen Jetting into the Molten Bath in BOFs: A Computational ExplorationSteel Research International, 2015
- A control method for agricultural greenhouses heating based on computational fluid dynamics and energy prediction modelApplied Energy, 2015
- Effect of blow parameters in the jet penetration by physical model of BOF converterJournal of Materials Research and Technology, 2014
- Effect of Nozzle Twisted Lance on Jet Behavior and Spitting Rate in Top Blown ProcessISIJ International, 2003