Flow Regime Determination for Finned Heat Exchanger Surfaces with Dimples/Protrusions
- 1 January 2013
- journal article
- research article
- Published by Taylor & Francis in Numerical Heat Transfer, Part A: Applications
- Vol. 63 (4) , 245-256
Abstract
There are many modalities that may be used to enhance heat transfer performance. One of these modes, the embossing of channel walls with dimples and/or protrusions, is a technique which has the advantage of simplicity of fabrication. The assessment of the quality of a geometry-based heat transfer enhancement technique frequently involves the change in pressure drop that accompanies the geometric modification. This realization provides the motivation for the investigation reported here. The focus of this work is the identification of the existence of various sub-regimes within the laminar-flow regime. The investigation was implemented by numerical simulation supplemented by a three-dimensional model of periodic fully developed flow. The selected channel-height Reynolds number range extended from 200 to 800. Within this range, three sub-regime laminar flows were identified: friction-dominated flow, inertial-loss-dominated flow, and the transition between these flows. Another focus of the results was the presentation of patterns of fluid flow and their impacts on the variation of the pressure drop with Reynolds number.Keywords
This publication has 15 references indexed in Scilit:
- Thermal performance of dimpled surfaces in laminar flowsInternational Journal of Heat and Mass Transfer, 2009
- Optimization of a staggered dimpled surface in a cooling channel using Kriging modelInternational Journal of Thermal Sciences, 2008
- Large Eddy Simulation Investigation of Flow and Heat Transfer in a Channel With Dimples and ProtrusionsJournal of Turbomachinery, 2008
- Investigation of dimpled fins for heat transfer enhancement in compact heat exchangersInternational Journal of Heat and Mass Transfer, 2008
- Numerical Predictions of Heat Transfer and Flow Characteristics of Heat Sinks with Ribbed and Dimpled Surfaces in Laminar FlowNumerical Heat Transfer, Part A: Applications, 2008
- Numerical Simulation of Laminar Flow and Heat Transfer Inside a Microchannel With One Dimpled SurfaceJournal of Electronic Packaging, 2006
- Shape Optimization of a Dimpled Channel to Enhance Turbulent Heat TransferNumerical Heat Transfer, Part A: Applications, 2005
- NUMERICAL PREDICTIONS OF HEAT TRANSFER AND FLUID FLOW CHARACTERISTICS FOR SEVEN DIFFERENT DIMPLED SURFACES IN A CHANNELNumerical Heat Transfer, Part A: Applications, 2005
- NUMERICAL PREDICTIONS OF FLOW STRUCTURE ABOVE A DIMPLED SURFACE IN A CHANNELNumerical Heat Transfer, Part A: Applications, 2004
- Fully Developed Flow and Heat Transfer in Ducts Having Streamwise-Periodic Variations of Cross-Sectional AreaJournal of Heat Transfer, 1977