Organic Brake Friction Composite Materials: Impact of Mixing Duration on Microstructure, Properties, Tribological Behavior and Wear Resistance
Open Access
Abstract
The lack of knowledge on the link between the manufacturing process and performance constitutes a major issue in brake lining development. The manufacturing process of organic brake friction composite materials includes several steps (mixing, preforming, hot molding and post-curing), which define their final microstructure, properties and performances. This study focuses on the effect of mixing duration on the microstructure, properties and tribological behavior of organic friction composite materials. The adopted methodology is based on simplified formulations effective in limiting synergistic effects by reducing the number and size distribution of constituents. Two simplified materials are here developed according to the mixing duration of the constituent introduction sequence. The microstructural characteristics are studied using 2D and 3D analyses, and then correlated with the thermophysical and mechanical properties. Wear mechanisms and tribological behavior are studied in relation to the microstructure and properties of the materials. The results show the effect of mixing duration as regards particle distribution and fiber arrangement. The distribution and size of fiber entanglements contribute to the formation of carbonaceous particle clusters, which create bulk bridges improving thermal conductivity. Moreover, the arrangement of rock fibers affects density, porosity and thermo-physical properties. In addition, the mixing disrupts the cohesion of fiber bundles with the matrix, affecting compressive modulus and wear behavior. This microstructural defect also fosters abundant third-body source flow, which disturbs the tribological circuit and behavior. Porosities induced by fiber entanglements, having a large and irregular size and distribution on the frictional surface, result in low wear resistance and alter the frictional stability.Keywords
All Related Versions
This publication has 47 references indexed in Scilit:
- Size effects in short fibre reinforced compositesEngineering Fracture Mechanics, 2013
- Effect of fiber arrangement on mechanical properties of short fiber reinforced compositesComposites Science and Technology, 2012
- A statistical analysis of fibre size and shape distribution after compounding in composites reinforced by natural fibresComposites Part A: Applied Science and Manufacturing, 2011
- On the use of the digital image correlation method for heterogeneous deformation measurement of porous solidsOptics and Lasers in Engineering, 2011
- A correlation between the tribological and mechanical properties of short carbon fibers reinforced PEEK materials with different fiber orientationsTribology International, 2010
- An experimental study on the effects of manufacturing parameters on the tribological properties of brake lining materialsWear, 2010
- A comprehensive microscopic study of third body formation at the interface between a brake pad and brake disc during the final stage of a pin-on-disc testWear, 2009
- Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlationComposites Science and Technology, 2007
- Effect of fiber addition on mechanical and tribological properties of a copper/phenolic-based friction materialWear, 2005
- Optimization of manufacturing parameters for a brake lining using Taguchi methodJournal of Materials Processing Technology, 2003