A Model for Multi Peak Dynamic Recrystallization in Copper
- 1 July 2007
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 550, 565-570
Abstract
Modelling hot flow stress during grain refinement operations of fcc metals has largely included the use of an Avrami type equation to describe the decrease in stress due to Dynamic Recrystallization (DRX). However when refining large-grained copper, the processing temperatures and strain rates often produce a multi peak behaviour, which is not predictable by an Avrami equation alone. If an initial grain size, D0, is greater than the stable dynamically recrystallized grain size, Drex, which is a function of the Zener-Hollomon Parameter, Z, then the material will tend to refine. However if the current the Zener-Hollomon value, given by current temperature and strain rate conditions, is lower than a critical value, Zc, which depends on D0, then a multi peak stress behaviour is expected while refining. The latter Relative-Grain-Size model (i.e. the D0-Zc and Drex-Z relationships plotted on the same log-log graph) is a practical model that allows determination of whether a material will grain coarsen or refine and whether the dynamic recrystallization behaviour will be monotonic or with multi peaks. The present authors devised a dynamic recrystallization algorithm to measure the stress due to the diminishing initial grain volume and to measure the correction stress due to recrystallizing grains. Analysis on the hot (600°C-950°C) compression data of a 99.9% pure copper inductively lead to the use of an Avrami type equation to describe the stress contribution produced by the deformation of the remaining initial grain volume and a damped cosine equation to describe the stress contribution of the synchronized volume of new grains. This work discusses the experimental evidence and analytical findings that inductively support the mathematical description of the stress-strain curve given by a Damped Cosine Avrami Model for discontinuous DRX.Keywords
This publication has 14 references indexed in Scilit:
- Modeling the Hot Flow Stress of Commercial Purity Coppers with Different Oxygen LevelsMaterials Science Forum, 2003
- Initiation of Dynamic Recrystallization in Constant Strain Rate Hot DeformationISIJ International, 2003
- Necklace formation during dynamic recrystallization: mechanisms and impact on flow behaviorActa Materialia, 1998
- Modeling the flow behavior of a medium carbon microalloyed steel under hot working conditionsMetallurgical and Materials Transactions A, 1997
- Experimental and mathematical simulation of microstructural evolution during hot rolling of Al and Cu materialJournal of Materials Processing Technology, 1996
- Comparison of dynamic softening in 301, 304, 316 and 317 stainless steelsHigh Temperature Technology, 1990
- Effect of test method on transition from multiple to single peak dynamic recrystallizationMetal Science, 1984
- Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerationsActa Metallurgica, 1984
- Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformationActa Metallurgica, 1969
- Procédé de détermination graphique des phénomènes transitoires au cours de la déformation des aciers à chaudRevue de Métallurgie, 1958