Thermoset modified with polyethersulfone: Characterization and control of the morphology
- 7 March 2020
- journal article
- research article
- Published by Wiley in Journal of Polymer Science
- Vol. 58 (8) , 1177-1188
Abstract
Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high‐performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone‐modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl‐p‐aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction‐induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.Keywords
This publication has 25 references indexed in Scilit:
- Study on epoxy/thermoplastic blends based on the addition of a novel aromatic block copolymerPolymer Engineering & Science, 2007
- Influence of a selected hardener on the phase separation in epoxy/thermoplastic polymer blendsJournal of Applied Polymer Science, 2004
- Phase separation in polysulfone-modified epoxy mixtures. Relationships between curing conditions, morphology and ultimate behaviorPolymer, 2000
- Development of bicontinuous morphologies in polysulfone–epoxy blendsPolymer, 1999
- Reaction-induced phase separation mechanisms in modified thermosetsPolymer, 1998
- Rubber‐ and thermoplastic‐modified polymer networks. Phase separation process induced by polymerization and polycondensationMacromolecular Symposia, 1995
- Phase separation and apparent phase dissolution during cure process of thermoset/thermoplastic blendPolymer, 1995
- A new time-temperature-transformation cure diagram for thermoset/thermoplastic blend: tetrafunctional epoxy/poly(ether sulfone)Polymer, 1993
- Control of intrinsic brittleness and toughness of polymers and blends by chemical structure: A reviewPolymer International, 1992
- Addition of polyethersulphone to epoxy resinsBritish Polymer Journal, 1983