Delamination Strength Comparison of Additively Manufactured Composite Curved Beams Using Continuous Fibers
Open Access
- 28 September 2023
- Vol. 15 (19) , 3928
Abstract
The objective of this study is to show the applicability of various 3D-printed composite curved beams using continuous fibers and their delamination strength when they are subjected to bending loading. Four-point bending tests are configured for comparative research on evaluating the effect of fiber types on the delamination strength and failure mode. Out-of-plane tensile properties are calculated analytically by using experimental data. The number of curved beams per build during multiple printing is examined to observe the effect of delay time between each deposited layer of parts. Macro-scale finite element simulations including surface-based cohesive concept for the selected 3D-printed composite curved beam design are also presented and compared. The analytical results show that carbon fiber reinforced curved beam design is superior to the other fiber types by at least 18% in the interlaminar tensile strength and is relatively challenging against the conventionally manufactured composite curved beams in the literature despite its low fiber volume ratio. There is no gross effect of delay time between each deposited layer of parts, although printing a single sample is favorable for better strength. There is a presence of compatibility between the analytical and numerical results as the percentage difference for maximum load, radial tensile strength and maximum displacement are found as 1.8%, 2.4% and 1.5%, respectively, in a 3D cohesive model. A 2D cohesive model offers a fast solution and a competitive agreement with test results when the 2D and 3D finite element models are compared.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu (1059B192101073)
This publication has 42 references indexed in Scilit:
- Delamination strength of composite curved beams reinforced by grooved stainless-steel Z-pinsComposite Structures, 2017
- Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selectionMaterials & Design, 2017
- Experimental research into interlaminar tensile strength of carbon/epoxy laminated curved beamsComposite Structures, 2017
- 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performanceRapid Prototyping Journal, 2017
- Resin treatment of free edges to aid certification of through thickness laminate strengthComposite Structures, 2016
- Effect of impact damage on the curved beam interlaminar strength of carbon/epoxy laminatesJournal of Adhesion Science and Technology, 2016
- Determination of the out-of-plane tensile strength using four-point bending tests on laminated L-angle specimens with different stacking sequences and total thicknessesComposites Part A: Applied Science and Manufacturing, 2016
- Methods for assessment of interlaminar tensile strength of composite materialsJournal of Composite Materials, 2014
- An engineering solution for mesh size effects in the simulation of delamination using cohesive zone modelsEngineering Fracture Mechanics, 2007
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996