Influence of base metal temper conditions on AA6082 and AA7050 dissimilar friction stir weld properties
- 30 May 2023
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (1) , 422-433
Abstract
In this work, the effect of base metal temper conditions was studied on joint properties of various dissimilar AA6082/AA7050 weld combinations: (i) 6082-T6/7050-T7, (ii) 6082-T6/7050-O, (iii) 6082-O/7050-T7, and (iv) 6082-O/7050-O. The weld macrostructure showed high susceptibility to onion ring formation when either side base metal was in O-temper condition. Heterogeneity in weld nugget microstructure was found to be minimum for dissimilar joints produced with different tempered base metals having the largest strength difference. The weld nugget average hardness was highest (120.86 HV) for the hardest base metals combination and lowest (97.57 HV) for the softest base metals combination dissimilar joints. The highest joint tensile strength was 218.5 MPa for weld fabricated from base metals having the smallest difference in tensile strength. In contrast, the lowest joint tensile strength was 120.4 MPa for weld produced from the combination of base metals having the greatest difference in tensile strength. All welded joints were fractured from the advancing side and exhibited ductile fracture behavior.Keywords
Funding Information
- Science and Engineering Research Board INDIA (ECR/2016/001738)
This publication has 35 references indexed in Scilit:
- Effects of heat treatment on the ballistic properties of AA6070 aluminium alloyInternational Journal of Impact Engineering, 2013
- Experimental study on the effect of welding speed and tool pin profiles on AA6082-O aluminium friction stir welded butt jointsInternational Journal of Engineering, Science and Technology, 2010
- Relationship between base metal properties and friction stir welding process parametersMaterials Science and Engineering: A, 2008
- Structure–property correlations in Al 7050 and Al 7055 high-strength aluminum alloysMaterials Science and Engineering: A, 2008
- Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plateMaterials Science and Engineering: A, 2008
- Influence of friction stir welding parameters on grain size and formability in 5083 aluminum alloyMaterials Science and Engineering: A, 2007
- Microstructure and Mechanical Properties of the Aluminium Alloy 6056 Welded by Friction Stir Welding TechniquesWelding in the World, 2006
- Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy platesMaterials Science and Engineering: A, 2006
- Microstructure evolution during FSW/FSP of high strength aluminum alloysMaterials Science and Engineering: A, 2005
- Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063Metallurgical and Materials Transactions A, 2002