Formation and Control of Transverse Corner Cracks in the Continuous Casting Slab of a Microalloyed Steel
- 13 January 2021
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 92 (6)
Abstract
To investigate transverse corner cracks for a microalloyed steel continuous casting slab, the metallography, microtopography, and three‐dimensional (3D) morphology of cracks are studied, respectively. High‐temperature mechanical properties are investigated and compared from two positions where samples are extracted from both the slab corner and surface of the slab center. The thermal history of the slab is simulated and optimized experiments are conducted. Transverse corner cracks are generated on the valley of oscillation marks. Mold powder and wear elements of the mold are not detected. Microstructures are refined near the cracks. Cracks are generated in secondary cooling zones and the cracking temperature is higher than Ar3 temperature. The extension path of cracks is not linear and cracks extend along the grain boundary. The third brittle temperature ranges (TBTR) are 764–832 °C and 793–808 °C in the two positions, respectively. The temperature at the slab corner in the bending and straightening zone falls into the brittle zone during the original water cooling condition, leading to the formation of cracks. The secondary cooling scheme is optimized to prevent the temperature at the slab corner in the bending and straightening zone from entering the TBTR, significantly reducing the occurrence of transverse corner cracks.Keywords
Funding Information
- National Natural Science Foundation of China (51874031, U1860206, 51725402, 51904024)
This publication has 29 references indexed in Scilit:
- Titanium micro addition in a centrifugally cast HPNb alloy: High temperature mechanical propertiesMaterials Science and Engineering: A, 2015
- Control of Transverse Corner Cracks on Low-Carbon Steel SlabsJOM, 2014
- Influence of B and Ti on hot ductility of high Al and high Al, Nb containing TWIP steelsMaterials Science and Technology, 2013
- Prevention of transverse corner cracks in continuously cast steel slabs using asymmetric secondary cooling nozzleIronmaking & Steelmaking: Processes, Products and Applications, 2011
- Understanding the low temperature end of the hot ductility trough in steelsMaterials Science and Technology, 2008
- Influence of Heat Treatment and Carbon Content on the Hot Ductility of Nb-Ti Microalloyed Steels.ISIJ International, 1993
- Relation between Hot Ductility and Grain Boundary Embrittlement of Low-Carbon Killed SteelsTetsu-to-Hagane, 1979
- Characteristics of Embrittlement in Steels above 600°CTetsu-to-Hagane, 1979
- Hot-ductility behaviour of C–Mn–Nb–Al steels and its relationship to crack propagation during the straightening of continuously cast strandMetals Technology, 1979
- Some considerations of strength and ductility in the continuous-casting processMetallurgical Transactions, 1972