Removal of cadmium and lead from aqueous solutions by magnetic acid-treated activated carbon nanocomposite
Open Access
- 1 August 2016
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (40) , 18782-18798
Abstract
In this study, a new approach was developed for the preparation of magnetic activated carbon (MAC) in which a nanocomposite with the mass ratio of 1:8 (Fe3O4:AC) was prepared using commercial activated carbon (AC) treated with nitric acid and magnetite nanoparticles synthesized by co-precipitation method. The MAC was characterized by scanning electron microscopy, nitrogen adsorption isotherm at 77 K, vibrating sample magnetometer, X-ray diffraction, and Fourier transform infrared spectroscopy. The results showed that MAC had desirable magnetic properties and pure Fe3O4 nanoparticles were successfully synthesized and added to AC. The nanocomposite was successfully used as a separable adsorbent for removing Pb2+ and Cd2+ from aqueous solutions. The adsorption performances were evaluated by Langmuir and Freundlich isotherms, which showed the data were well fitted to the Langmuir model. The adsorbent showed good adsorption capacities of 49.8 and 86.2 mg/g for cadmium and lead at the initial pH levels of 6.0 and 5.0, respectively. Kinetic studies were performed using pseudo-first-order and pseudo-second-order kinetic models and the results demonstrated that the adsorption process followed second-order model. Thermodynamics of the adsorption of lead and cadmium onto MAC was also studied with results that showed the adsorption process was endothermic and spontaneous. Adsorption performance of MAC was also evaluated using battery manufacture wastewater samples and removal efficiencies of 91.4 and 96.6% were obtained for the removal of Cd2+ and Pb2+, respectively.Keywords
This publication has 106 references indexed in Scilit:
- Comparative study of heavy metal ions sorption onto activated carbon, carbon nanotubes, and carbon-encapsulated magnetic nanoparticlesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2010
- Removal of lead(II) from wastewater by activated carbon developed from Tamarind wood by zinc chloride activationChemical Engineering Journal, 2009
- Adsorption of Pb(II) on diatomite as affected via aqueous solution chemistry and temperatureColloids and Surfaces A: Physicochemical and Engineering Aspects, 2009
- Potentiality of lignin from the Kraft pulping process for removal of trace nickel from wastewater: Effect of demineralisationBioresource Technology, 2009
- Competitive adsorption of heavy metal ions on peatJournal of China University of Mining and Technology, 2008
- Reverse osmosis removal of arsenic residues from bioleaching of refractory gold concentratesMinerals Engineering, 2008
- Synthesis and properties of magnetic Fe3O4-activated carbon nanocomposite particles for dye removalMaterials Letters, 2008
- Removal of copper(II) ions from aqueous medium by biosorption onto powdered waste sludgeProcess Biochemistry, 2006
- Use of curdlan and activated carbon composed adsorbents for heavy metal removalProcess Biochemistry, 2005
- On the kinetics of precipitate flotation of Cr III using sodium dodecylsulfate and ethanolMinerals Engineering, 2005