Minimizing usage of silane coupling agent for amine-grafted mesoporous silica CO2 adsorbent
Authors:
Open Access
- 8 April 2024
- journal article
- research article
- Published by Springer Nature in Journal of Porous Materials
- Vol. 31 (4) , 1289-1304
Abstract
Amine-grafted adsorbents are promising CO2 adsorbents; however, the excessive addition of an amino silane coupling agent during their synthesis increases their production cost. Thus, using low amounts of silane, we synthesized 3-aminopropyltrimethoxysilane (APTMS)-grafted SBA-15 mesoporous silica and evaluated its CO2 adsorption performance. APTMS-grafted SBA-15 samples were prepared using either impregnation or heating–filtration method (grafting). The obtained samples were characterized by X-ray diffraction spectroscopy, transmission electron microscopy, N2 adsorption/desorption, scanning electron microscopy, magic-angle spinning nuclear magnetic resonance, and elemental analysis. The results revealed that the micropores of SBA-15 were preferentially blocked, and APTMS increasingly occupied the mesopores with increasing amine loading. The CO2-adsorption performance of the adsorbents was measured by thermogravimetric analysis under dry conditions. Both synthesis methods achieved high amine immobilization efficiency (78.3–92.2%), as estimated from the amount of silane coupling agents used in the synthesis and that immobilized on the support. The adsorbents prepared by the two methods adsorbed similar amounts of CO2 of approximately 0.5 mmol g− 1 in 400 ppm CO2 and ~ 1.0 mmol g− 1 in 5 vol% CO2. The adsorption amounts attained in this study are comparable to those of previously reported silane-coupling-agent-modified adsorbents that were prepared with more silane. In contrast, the adsorption rate of the samples was affected by the synthesis method, even with similar amine loadings. Nonetheless, the results revealed that even with a low amount of the silane coupling agent, high-performance amine-grafted CO2 adsorbents could be synthesized.Keywords
Funding Information
- Hiroshima University
This publication has 85 references indexed in Scilit:
- Frontiers of CO2 Capture and Utilization (CCU) towards Carbon NeutralityAdvances in Atmospheric Sciences, 2022
- Mitigation of greenhouse gases released from mining activities: A reviewInternational Journal of Minerals, Metallurgy and Materials, 2021
- The CO2 adsorption performance of aminosilane-modified mesoporous silicasJournal of Thermal Analysis and Calorimetry, 2021
- Recent advances in development of amine functionalized adsorbents for CO2 captureAdsorption, 2019
- Role of the type of grafting solvent and its removal process on APTES functionalization onto SBA-15 silica for CO2 adsorptionJournal of Porous Materials, 2019
- Global warming: review on driving forces and mitigationEnvironmental Progress & Sustainable Energy, 2018
- Carbon Dioxide Capture Adsorbents: Chemistry and MethodsChemSusChem, 2016
- Amine‐functionalized mesoporous silica: A material capable of CO2 adsorption and fast regeneration by microwave heatingAIChE Journal, 2015
- CO2 capture by amine-functionalized nanoporous materials: A reviewKorean Journal of Chemical Engineering, 2014
- The Role of Amine Surface Density in Carbon Dioxide Adsorption on Functionalized Mixed Oxide SurfacesChemSusChem, 2011