High-Reflectance and Thermally Stable AgCu Alloy p-Type Reflectors for GaN-Based Light-Emitting Diodes
Authors:
- Hyunsoo KimHKHyunsoo Kim
- Kwang Hyeon BaikKBKwang Hyeon Baik
- Jaehee ChoJCJaehee Cho
- Jeong Wook LeeJLJeong Wook Lee
- Sukho YoonSYSukho Yoon
- Hyungkun KimHKHyungkun Kim
- Sung-Nam LeeSLSung-Nam Lee
- Cheolsoo SoneCSCheolsoo Sone
- Yongjo ParkYPYongjo Park
- Tae-Yeon SeongTSTae-Yeon Seong
- 1 March 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 19 (5) , 336-338
Abstract
We report on the formation of high-quality AgCu alloy p-type reflectors for GaN-based light-emitting diodes (LEDs). Compared with Ag contacts, the AgCu alloy reflectors produce lower specific contact resistance (7.5times10-5 Omegamiddotcm2), higher light reflectance (89.5% at 400 nm), and better thermal stability (absence of interfacial voids), when annealed at 400 degC in N2 : O2(=1:1) ambient. LEDs fabricated with the AgCu reflectors show light output power better than that of LEDs with the Ag reflectors. The ohmic mechanism for the AgCu alloy reflectors is explained in terms of the formation of Ag-Ga solid solution and the presence of Cu-oxide nano-particles at the contact/GaN interfaceKeywords
This publication has 13 references indexed in Scilit:
- Highly transparent Ag∕SnO2 ohmic contact to p-type GaN for ultraviolet light-emitting diodesApplied Physics Letters, 2004
- Mechanism for ohmic contact formation of Ni∕Ag contacts on p-type GaNApplied Physics Letters, 2004
- Low-resistance and high-reflectance Ni∕Ag∕Ru∕Ni∕Au ohmic contact on p-type GaNApplied Physics Letters, 2004
- Low resistance and highly reflective Cu–Ni solid solution/Ag ohmic contacts to p-GaN for flip-chip light emitting diodesPhysica Status Solidi (a), 2004
- Enhanced adhesion and performance of the source/drain electrode using a single-layered Ag(Cu) film for an amorphous silicon thin-film transistorApplied Physics Letters, 2003
- Low resistance high reflectance contacts to p-GaN using oxidized Ni/Au and Al or AgApplied Physics Letters, 2003
- Reduction of the Schottky barrier height on silicon carbide using Au nano-particlesSolid-State Electronics, 2002
- The dependence of the structure and electronic properties of wurtzite GaN surfaces on the method of preparationApplied Surface Science, 1998
- Electron transport at metal-semiconductor interfaces: General theoryPhysical Review B, 1992
- Development of high-strength, high-conductivity Cu–Ag alloys for high-field pulsed magnet useApplied Physics Letters, 1991