Evaluating the effect of environmental conditions on high compressive strain rates in unfilled and filled neoprene rubbers
Open Access
- 22 August 2023
- journal article
- research article
- Published by SAGE Publications in Journal of Elastomers & Plastics
- Vol. 55 (8) , 1199-1212
Abstract
Elastomers are known for their strain-rate-dependent properties not only to quasistatic but also to high strain rate deformations, where mechanical behavior is significantly affected by inertia. Concurrently, environmental changes, such as temperature and humidity variations, can impact their stress response to deformation. This study investigates the effects of material layers within neoprene samples on mitigating these environmental changes. While the presence of an intermediate layer proves effective against temperature and humidity influence, it fails to block the impact of increasing high strain rates. Moreover, the different humidity levels at room and elevated temperatures do not significantly alter the mechanical behavior of filled neoprene samples compared to pure neoprene. Notably, in unfilled neoprene, an increase in humidity levels, other than an absolutely dry environment, leads to a notable stress level rise at room temperature, while under elevated temperature conditions, there is a significant stress decrease with increasing humidity. However, neoprene filled with polyester/cotton or nylon displays resilience to diminishing mechanical behavior under various temperature and humidity regulations, indicating that the material layer within these samples effectively “protects” the rubbers from potential stress lapses observed in unfilled neoprene. While a high strain rate compression affects the behavior of the filled variants significantly, increasing humidity and temperature have minimal impact on their stress levels. These findings offer valuable insights into the dynamic responses of elastomers to environmental changes, highlighting the advantages of using filled rubbers in diverse applications.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (2020-543378)
This publication has 26 references indexed in Scilit:
- Experimental investigation on the tensile behavior of polyurea at high strain ratesMaterials & Design (1980-2015), 2013
- A Review on Silicone RubberNational Academy Science Letters, 2013
- Influence of the temperature on the mechanical behaviour of filled and unfilled silicone rubbersPolymer Testing, 2013
- Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain ratesInternational Journal of Impact Engineering, 2009
- Effects of ultraviolet irradiation on the static and dynamic properties of neoprene rubbersJournal of Applied Polymer Science, 2008
- Mechanical Behavior of Rubber at High Strain RatesRubber Chemistry and Technology, 2006
- Hopkinson bar experimental technique: A critical reviewApplied Mechanics Reviews, 2004
- Dynamic stress equilibration in split Hopkinson pressure bar tests on soft materialsExperimental Mechanics, 2004
- Correlation of chemical and mechanical property changes during oxidative degradation of neoprenePolymer Degradation and Stability, 2000
- Neoprene, The Chloroprene RubberIndustrial & Engineering Chemistry, 1940