Flow in a Pipe with a Ring-Type Obstacle
Authors:
- 1 May 1996
- journal article
- research article
- Published by Taylor & Francis in International Journal of Computational Fluid Dynamics
- Vol. 6 (3) , 225-237
Abstract
Turbulent calculations have been carried out to investigate flows in a circular pipe with a ring-type obstacle attached to the wall for Reynolds numbers from 102 to 105. The numerical procedure is based on the solution of the primitive variable formulation of the Reynolds-averaged Navier-Stokes governing equations and the k — ε turbulence model in axisymmetric co-ordinate system and with a non-staggered grid. The obstacle opening ratio (d/D) is 0.5, and the obstacle thickness ratio (h/D) is 0.13. The numerical results reveal the effect of the Reynolds number on the flow fields. With the Reynolds number varying from 102 to 105, the reattachment length (Zr/D) increases to a maximum of 3.1 at Re = 5 × 102 and then decreases gradually to a value of 2.1. The velocity profiles of the fully developed flow change from parabolic to power-law curves. The non-dimensional maximum turbulent shear stress (τmax varies in a range from 0.2 to 0.4 and the pressure loss (Ploss ) across the obstacle varies between 8.0 and 11.0, while the maximum vorticity (Ωmax) remains unchanged at a value of 16.2. At Re =5 × 102 and 103, laminar cores exist downstream of the obstacle. For the cases of Re > 3 × 104, the τmax and P loss remain unchanged at 0.32 and 10.5, respectively. The flow field structures are similar. The distributions of the centreline turbulent kinetic energy, velocity and pressure along axial distance remain unchanged.Keywords
This publication has 11 references indexed in Scilit:
- LDV Measurements of Periodic Fully Developed Main and Secondary Flows in a Channel With Rib-Disturbed WallsJournal of Fluids Engineering, 1993
- Numerical studies of fluid flow through tubes with double constrictionsInternational Journal for Numerical Methods in Fluids, 1990
- 2‐D Depth‐Averaged Flow Computation near GroyneJournal of Hydraulic Engineering, 1990
- Symmetric and Asymmetric Turbulent Flows in a Rectangular Duct With a Pair of RibsJournal of Fluids Engineering, 1988
- Radial and Axial Turbulent Flow Measurements With an LDV in an Axisymmetric Sudden Expansion Air FlowJournal of Fluids Engineering, 1988
- COMPUTATION OF INCOMPRESSIBLE TURBULENT FLOWS BY AN OPPOSED-DIFFERENCING SCHEMENumerical Heat Transfer, 1987
- Numerical simulation of steady turbulent flow through trileaflet aortic heart valves—II. Results on five modelsJournal of Biomechanics, 1985
- Numerical Study of Turbulent Axisymmetric Jets Impinging on a Flat Plate and Flowing Into an Axisymmetric CavityJournal of Fluids Engineering, 1984
- ON THE CALCULATION OF TURBULENT HEAT TRANSPORT DOWNSTREAM FROM AN ABRUPT PIPE EXPANSIONNumerical Heat Transfer, 1980
- A Numerical Study of the Laminar Viscous Incompressible Flow Through a Pipe OrificeJournal of Fluids Engineering, 1978