Vibration of Pressure Loaded Nonlinear Rectangular Plates with Cross Stiffener
Authors:
- 1 July 2002
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Engineering Mechanics
- Vol. 128 (7) , 788-794
Abstract
The resonant frequency response of large static pressure loaded, nonlinear rectangular plates with a cross stiffener have been investigated theoretically. The nonlinear Berger equation was solved by applying the finite-difference method. Replacing the partial differential equation governing the small amplitude vibration of static pressure loaded plates and the boundary conditions by the finite-difference equations approximately, the simultaneous, homogeneous, and algebraic equations are obtained. Under the condition that the determinant of coefficient matrix must be equal to zero, the resonant frequencies are determined. The numerical procedure is simpler than the procedures based on the von Kármán theory, and reasonable results are obtained.Keywords
This publication has 4 references indexed in Scilit:
- A Simplified Approach to Analysis of Large Deflections for Rectangular Plates with a Cross-Stiffener.JSME International Journal Series A, 1999
- Resonance Response of Nonlinear Circular Plates Subjected to Uniform Static LoadJournal of Applied Mechanics, 1970
- A New Approach to the Analysis of Large Deflections of PlatesJournal of Applied Mechanics, 1955
- Bending of a Uniformly Loaded Circular Plate with a Clamped Boundary on a Single-Beam Grid with Clamped EdgesTransactions of the Japan Society of Mechanical Engineers, 1954