Analysis of the Dynamic Behavioral Performance of Mechanical Systems With Multi–Clearance Joints
- 22 July 2011
- journal article
- Published by ASME International in Journal of Computational and Nonlinear Dynamics
- Vol. 7 (1) , 011002
Abstract
In this investigation, the effect of revolute joints’ clearance on the dynamic performance of mechanical systems is reported. A computation algorithm is developed with the aid of SolidWorks/CosmosMotion software package. A slider-crank mechanism with one and two clearance-joints is studied and analyzed when working in vertical and in horizontal planes. The simulation results point out that the presence of such clearance in the joints of the system understudy leads to high peaks in the characteristic curves of its kinematic and dynamic performance. For a multiclearance joints mechanism, the maximum impact force at its joints takes its highest value at the nearest joint to the input link. This study also shows that, when the mechanism works in horizontal plane, the rate of impacts at each clearance-joint increases and consequently the clearance-joints and actuators will deteriorate faster.Keywords
This publication has 22 references indexed in Scilit:
- Dynamic analysis of a flexible linkage mechanism with cracks and clearanceMechanism and Machine Theory, 2010
- Computerized design and simulation of meshing of modified double circular-arc helical gears by tooth end relief with helixMechanism and Machine Theory, 2010
- Modeling and simulation of wear in revolute clearance joints in multibody systemsMechanism and Machine Theory, 2009
- Determining link parameters using genetic algorithm in mechanisms with joint clearanceMechanism and Machine Theory, 2009
- The FEM analysis and approximate model for cylindrical joints with clearancesMechanism and Machine Theory, 2007
- Revolute joints with clearance in multibody systemsComputers & Structures, 2004
- Uncertainty analysis of planar and spatial robots with joint clearancesMechanism and Machine Theory, 2000
- Counterweight optimization for reducing dynamic effects of clearance at a revolute jointMechanism and Machine Theory, 1987
- An experimental investigation into the dynamic behaviour of revolute joints with varying degrees of clearanceMechanism and Machine Theory, 1985
- Coefficient of Restitution Interpreted as Damping in VibroimpactJournal of Applied Mechanics, 1975