Mechanical and Electronic Amplitude-Limiting Techniques in a MEMS Resonant Accelerometer
- 29 November 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 12 (6) , 1719-1725
Abstract
Two methods for limiting the oscillation amplitude in micromechanical resonators, typically used in many kinds of MEMS sensors, are discussed and compared. First, it is shown how the presence of parasitic capacitances sets several constraints on the design of the oscillating circuit gain and bandwidth. The paper specifically focuses on the case of a transimpedance based oscillator coupled to a clamped-clamped beam, that forms the sensing element of a resonant accelerometer. Experimental results then show that the oscillating amplitude can be limited either using an electronic limiting stage, or exploiting the mechanical nonlinearities of the beam for large displacements. Though the latter approach is advantageous in terms of power dissipation, it is shown that the sensitivity of the resonant accelerometer is strongly compromised.Keywords
This publication has 18 references indexed in Scilit:
- MEMS Motion Sensors Based on the Variations of the Fringe CapacitancesIEEE Sensors Journal, 2010
- A Resonant Microaccelerometer With High Sensitivity Operating in an Oscillating CircuitJournal of Microelectromechanical Systems, 2010
- A CMOS Readout Circuit for SOI Resonant Accelerometer With 4-$\mu \rm g$ Bias Stability and 20-$ \mu\rm g/\sqrt{{\hbox{Hz}}}$ ResolutionIEEE Journal of Solid-State Circuits, 2008
- A Resonant Micromachined Magnetic Field SensorIEEE Sensors Journal, 2007
- Series-resonant VHF micromechanical resonator reference oscillatorsIEEE Journal of Solid-State Circuits, 2004
- Influence of automatic level control on micromechanical resonator oscillator phase noise2004
- Design and performance of CMOS micromechanical resonator oscillators2002
- Draft revision of IEEE STD 1139-1988 standard definitions of physical quantities for fundamental, frequency and time metrology-random instabilities2002
- Time and Frequency (Time-Domain) Characterization, Estimation, and Prediction of Precision Clocks and OscillatorsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1987
- Characterization of phase and frequency instabilities in precision frequency sources: Fifteen years of progressProceedings of the IEEE, 1978