A novel approach to dissimilar joining of AA7075 to AZ31B by friction stir soldering using Sn intermediate layer
- 30 January 2022
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 37 (8) , 942-955
Abstract
The dissimilar joining of 7075 to AZ31 by the friction stir soldering (FSS) process using a Sn interlayer was performed for the first time. The most appropriate microstructure with the highest shear strength was obtained by the one-pass FSS process via a 120 μm-thick intermediate layer. In the optimum situation, the 7075/solder interface was covered with an uninterrupted wavy layer of Sn solid solution, whereas the AZ31/Solder interface was covered with a thin intermetallic region (IMC) consisting of fine-Mg2Sn intermetallics distributed in an Mg2Sn + βSn eutectic matrix. The thickness of the IMC region increased with the decreasing thickness of the intermediate layer and/or the increasing FSS passes, leading to the deterioration of the joint strength. No Al-Mg intermetallics were detected on either the retreated or the advanced side of the one-pass joints; however, isolated Islands and a continuous network of Al-Mg intermetallics were identified at the advanced and retreated sides of the three-pass joints, respectively. In comparison with the advanced side, the retreated side contained a thinner tin-rich solid solution and a thicker IMC region. Moreover, the probability of crack formation or creation of brittle Al-Mg intermetallics on the retreated side was more than those on the advanced side.Keywords
This publication has 34 references indexed in Scilit:
- Microstructure and property of friction stir welding joint of 7075Al and AZ31BMgJournal of Shanghai Jiaotong University (Science), 2012
- The effect of water cooling during dissimilar friction stir welding of Al alloy to Mg alloyMaterials & Design (1980-2015), 2012
- Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloyTransactions of Nonferrous Metals Society of China, 2010
- Microstructure of friction stir welding of aluminium alloy to magnesium alloyScripta Materialia, 2009
- Magnesium alloy applications in automotive structuresJOM, 2008
- Dissimilar friction stir welding between magnesium and aluminum alloysMaterials Letters, 2008
- Friction stir lap joining aluminum and magnesium alloysScripta Materialia, 2008
- Friction stir welding and processingMaterials Science and Engineering: R: Reports, 2005
- Dissimilar material laser welding between magnesium alloy AZ31B and aluminum alloy A5052-OScience and Technology of Advanced Materials, 2005
- Constitutional liquation during dissimilar friction stir welding of Al and Mg alloysScripta Materialia, 2004