Enhanced Hydrogen Production from Sawdust Decomposition Using Hybrid-Functional Ni-CaO-Ca2SiO4 Materials
- 14 September 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 51 (19) , 11484-11492
Abstract
A hybrid-functional material consisting of Ni as catalyst, CaO as CO2 sorbent, and Ca2SiO4 as polymorphic “active” spacer was synthesized by freeze-drying a mixed solution containing Ni, Ca and Si precursors, respectively, to be deployed during sawdust decomposition that generated gases mainly containing H2, CO, CO2 and CH4. The catalytic activity showed a positive correlation to the Ni loading, but at the expense of lower porosity and surface area with Ni loading beyond 20 wt %, indicating an optimal Ni loading of 20 wt % for Ni-CaO-Ca2SiO4 hybrid-functional materials, which enables ∼626 mL H2 (room temperature, 1 atm) produced from each gram of sawdust, with H2 purity in the product gas up to 68 vol %. This performance was superior over a conventional supported catalyst Ni–Ca2SiO4 that produced 443 mL H2 g-sawdust–1 under the same operating condition with a purity of ∼61 vol %. Although the Ni-CaO bifunctional material in its fresh form generated a bit more H2 (∼689 mL H2 g-sawdust–1), its cyclic performance decayed dramatically, resulting in H2 yield reduced by 62% and purity dropped from 73 to 49 vol % after 15 cycles. The “active” Ca2SiO4 spacer offers porosity and mechanical strength to the Ni-CaO-Ca2SiO4 hybrid-functional material, corresponding to its minor loss in reactivity over cycles (H2 yield reduced by only 7% and H2 purity dropped from 68 to 64 vol % after 15 cycles).Keywords
Funding Information
- China Postdoctoral Science Foundation (2017M610910)
- Tsinghua University (20161080094)
- National Natural Science Foundation of China (51506112)
This publication has 54 references indexed in Scilit:
- Rice husk gasification in a two-stage fixed-bed gasifier: Production of hydrogen rich syngas and kineticsInternational Journal of Hydrogen Energy, 2016
- Air–steam gasification of biomass in fluidized bed with CO2 absorption: A kinetic model for performance predictionFuel Processing Technology, 2015
- Hydrogen production by coal gasification in supercritical water with a fluidized bed reactorInternational Journal of Hydrogen Energy, 2010
- Production of ultrapure hydrogen from biomass gasification with airChemical Engineering Science, 2009
- Potential importance of hydrogen as a future solution to environmental and transportation problemsInternational Journal of Hydrogen Energy, 2008
- Hydrogen from coal gasification: An economical pathway to a sustainable energy futureInternational Journal of Coal Geology, 2006
- Hydrogen from natural gas: part I—autothermal reforming in an integrated fuel processorInternational Journal of Hydrogen Energy, 2005
- Hydrogen production and utilisation opportunities for AustraliaInternational Journal of Hydrogen Energy, 2005
- Natural gas reforming and CO2 mitigationCatalysis Today, 2005
- Reforming of natural gas—hydrogen generation for small scale stationary fuel cell systemsJournal of Power Sources, 2002