Comparative study of the interface passivation properties of LiF and Al2O3 using silicon MIS capacitor
Open Access
- 1 April 2024
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (14)
Abstract
Lithium fluoride (LiF) is currently a very popular dielectric material used as a passivation or transport layer in a variety of applications, especially in high-efficiency solar cells. Despite this, its conduction properties and interface behavior with silicon remain largely unexplored. In this work, a LiF metal–insulator–semiconductor (MIS) structure is fabricated and characterized, and its properties are compared to the well-understood aluminum oxide (Al2O3) MIS structure. First, a higher current density in LiF compared to Al2O3 is highlighted, as well as its PN junction-like behavior with n-type silicon (n-Si), being rather unconventional for a dielectric layer. C–V measurements showcase the likely presence of an interface defect, causing an increase in the apparent doping and a shift in the flatband voltage VFB by +70 meV. This defect is found to be of the acceptor type, which renders the interface fixed charge more negative and improves the field-effect passivation in the case of a negative Qf. Finally, a density of interface states Dit≈2×1011 cm−2 eV−1 was found for LiF/n-Si, which is a low value showing appropriate chemical passivation at the interface. Overall, this work enables us to shed more light on the interface properties of LiF on n-Si, which is an essential step toward its wider use in state-of-the-art solar cells and other silicon-based devices.Keywords
This publication has 24 references indexed in Scilit:
- Dielectric Front Passivation for Cu(In,Ga)Se2 Solar Cells: Status and ProspectAdvanced Energy and Sustainability Research, 2022
- Field Effect Passivation in Perovskite Solar Cells by a LiF InterlayerAdvanced Energy Materials, 2022
- Characterization of thin Al2O3/SiO2 dielectric stack for CMOS transistorsMicroelectronic Engineering, 2022
- Perovskite Metal–Oxide–Semiconductor Structures for Interface CharacterizationAdvanced Materials Interfaces, 2021
- Comparative Study of Al2O3 and HfO2 for Surface Passivation of Cu(In,Ga)Se2 Thin Films: An Innovative Al2O3/HfO2 Multistack DesignPhysica Status Solidi (a), 2021
- A review of Al2O3 as surface passivation material with relevant process technologies on c-Si solar cellOptical and Quantum Electronics, 2021
- Aluminum Oxide-aluminum Stacks for Contact Passivation in Silicon Solar CellsEnergy Procedia, 2014
- Passivation effects of atomic-layer-deposited aluminum oxideEPJ Photovoltaics, 2013
- Approach for Al2O3 rear surface passivation of industrial p‐type Si PERC above 19%Progress in Photovoltaics: Research and Applications, 2012
- Interfacial chemistry of Alq3 and LiF with reactive metalsJournal of Applied Physics, 2001